Mercedes-Benz C230 Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz C230 Fuel Injector Replacement is $584 with $402 for parts and $182 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1997 Mercedes-Benz C230L4-2.3L	Service typeFuel Injector Replacement	Estimate$2195.30	Shop/Dealer Price$2688.96 - $4145.84
2008 Mercedes-Benz C230V6-2.5L	Service typeFuel Injector Replacement	Estimate$2054.62	Shop/Dealer Price$2495.04 - $3800.41
2003 Mercedes-Benz C230L4-1.8L Turbo	Service typeFuel Injector Replacement	Estimate$1612.61	Shop/Dealer Price$1969.22 - $3028.80
2009 Mercedes-Benz C230V6-2.5L	Service typeFuel Injector Replacement	Estimate$2054.62	Shop/Dealer Price$2495.13 - $3800.57
2004 Mercedes-Benz C230L4-1.8L Turbo	Service typeFuel Injector Replacement	Estimate$1612.61	Shop/Dealer Price$1972.82 - $3035.11
2007 Mercedes-Benz C230V6-2.5L	Service typeFuel Injector Replacement	Estimate$1838.02	Shop/Dealer Price$2224.92 - $3368.32
2000 Mercedes-Benz C230L4-2.3L Turbo	Service typeFuel Injector Replacement	Estimate$2610.23	Shop/Dealer Price$3219.60 - $5038.13
1999 Mercedes-Benz C230L4-2.3L Turbo	Service typeFuel Injector Replacement	Estimate$2610.23	Shop/Dealer Price$3219.56 - $5038.06

Show example Mercedes-Benz C230 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(314)

Rating Summary

288

13

5

4

4

288

13

5

4

4

SEE REVIEWS NEAR ME

Eddie

39 years of experience

28 reviews

Eddie

39 years of experience

by Mike Roberts

C230 2006 - Oil Change - Boise, ID

Eddie did an incredible job!

Juan

4 years of experience

4 reviews

Juan

4 years of experience

by Phyllis Thermezi

C230 2006 - Check Engine Light is on - Fort Lauderdale, FL

Juan arrived con time he was in PPE Gear pleasant polite explained everything clearly I would recommend Juan to anyone thank you for excellent service you provided me

Alexander

5 years of experience

126 reviews

Request Alexander

Alexander

5 years of experience

Request Alexander

by Carl Graf

C230 2007 - Trunk Lock Actuator - Grove City, OH

experienced, knowledgeable was in and out before I realized it and for a MB C230 that's saying something. I found my new "Go To"

Ruben

10 years of experience

136 reviews

Ruben

10 years of experience

by Prof dave Show

C230 2005 - Fuel Pump - Columbia, SC

Ruben is a very proficient Mechanic, with good work ethics and manners. He took time to explain the pertinent issues and answer all my questions in detail. He appears to be very knowledgeable about Mercedes, as evident by his explanations regarding the Service he provided and my Car in general.

Excellent Rating

(314)

Rating Summary

288

13

5

4

4

288

13

5

4

4

SEE REVIEWS NEAR ME

Recent articles & questions

Top 10 Scenic Drives in Colorado

Colorado is a state so rich in natural beauty with its mix of desert terrain and richly forested mountains. Regardless of the season, there is something breathtaking to see. Snow-capped peaks provide a picturesque background in winter, summer is ideal...

What Is a Strut?

People talking about vehicle suspensions often refer to “shocks and struts.” Hearing this, you may have wondered just what a strut is,...

A Buyer’s Guide to the 2011 Mazda Tribute

2011 2011 marked the final year of production for the Mazda Tribute, a compact SUV that shared a platform with certain Ford models. The Tribute managed to combine relative affordability with decent performance and a modicum of comfort while driving...

clarinet noise 80 mph

Hi, there may be too much air coming through the cabin air filter inlet located in the engine bay, and the turbulence of it causes the clarinet sound. I suggest that the condition of the cabin air filter (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-cabin-air-filter) is...

My car's temperature goes between 102 degrees and 78 degrees Celsius. Is this normal? - 2013 Honda Jazz 1.3

Hi there. From the description you have provided, your vehicle's temperature going down when driving uphill is opposite from the usual complaint. Being in second gear while going uphill, the engine's RPM being higher should increase coolant circulation. The engine's...

Where is the relay flasher located in the 2002 Hyundai XG350

Hello -both the flasher unit (https://www.yourmechanic.com/article/how-to-replace-a-turn-signal-hazard-flasher-by-jessica-howe) and the relay for it are close to each other, and under the dash just left of the steering column. The knee crash pad will need to be removed to make it easier to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com