Mercedes-Benz C220 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz C220 Power Steering Pressure Hose Replacement is $339 with $185 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Mercedes-Benz C220L4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$604.66Shop/Dealer Price$720.13 - $1050.95
1996 Mercedes-Benz C220L4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$602.82Shop/Dealer Price$700.27 - $981.05
1995 Mercedes-Benz C220L4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$594.75Shop/Dealer Price$706.87 - $1035.17
Show example Mercedes-Benz C220 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Grzegorz

42 years of experience
473 reviews
Grzegorz
42 years of experience
Mercedes-Benz C220 L4-2.2L - Oil Change - San Francisco, California

Jose

18 years of experience
154 reviews
Jose
18 years of experience
Mercedes-Benz C220 L4-2.2L - Oil Change - Las Vegas, Nevada
Jose showed up right on time. He was very knowledgeable and completed the job very quickly. He also suggested some other things that I might need but was not pushy. Thank you so much!

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Mercedes-Benz C220 L4-2.2L - car is locked...key wont turn and steering wheel will not unlock. - Concord, California

Christopher

9 years of experience
120 reviews
Christopher
9 years of experience
Mercedes-Benz C220 L4-2.2L - Oil/Fluid Leak - Acworth, Georgia
Christopher presented a friendly and professional approach. He throughly explained the diagnosis and ensured that I understood. I highly recommend Christopher.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Mercedes-Benz C220 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Replace Your Car's Fuse Box
A fuse box organizes all of the car's fuses and sometimes relays as well. A fuse box will usually fail from physical damage or electrical issues.
A Buyer’s Guide to the 2012 Audi A3 TDI
Consumers Consumers steered clear of hatchbacks for a while but Audi has brought a stylish, functional, high-end option into the arena and buyers have responded. The A3 TDI offers all the versatility and performance you expect from Audi in a...
How to Register a Car in Ohio
Are Are you new to the state of Ohio? If you answered yes, then you will need to take the time to make sure you get your car registered. In order to drive on the Ohio roadways legally, you have...

All brake on my vehicle are locking up while driving

Hi there. There are a few things that will cause this. Most of the time when this occurs it is due to petroleum contamination in the brake system. If something other than brake fluid was put into the master cylinder...

Is CBS useful on slippery roads, gravel etc

Hello, thank you for writing in. CBS is also known as combined braking system, or linked braking system. What it does is link up front and back brakes on motor cycles and scooters to reduce lock up of having to...

My rear drivers side tire is flared out and my caliper is scraping my rotor causing foul smelling smoke to bellow from wheel well

Hi Kyle. Thanks for contacting us tonight. Yes - what you are describing is a very serious issue - especially since this is a drive axle. It's possible that you have a broken axle or hub - which should be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com