Mercedes-Benz B250e Lubricate Driveshaft at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,647)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,647)

Lubricate Driveshaft Service

How much does a Lubricate Driveshaft cost?

On average, the cost for a Mercedes-Benz B250e Lubricate Driveshaft is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz B250eElectricService typeLubricate DriveshaftEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Mercedes-Benz B250eElectricService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz B250e Lubricate Driveshaft prices

What is lubricating the driveshaft all about?

Along the drivetrain, whenever torque needs to travel from one place to another, a driveshaft is used. Some cars have two driveshafts under them, usually for four-wheel-drive applications. U-Joints are couplings that hold sections of driveshaft together and can withstand large amounts of torque. The U-joint and the slip both need lubrication to work smoothly. This means lubricant needs to be applied to every point where the driveshaft meets another section of shaft or any other part of the vehicle.

Keep in mind:

  • While lubricating will help with scraping noise and minor vibration, it will not repair actually broken parts.
  • Inspect the parts of the the driveshaft to make sure they do not need full replacement.
  • Even small spots of excess wear are bad on parts that withstand so much torque, no problem is too small to be addressed on the driveshaft.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The slip joints and U-joints on all drive shafts are located
  • The Zerk grease fittings on the slip joint and U-joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

Check the manual of your vehicle to see if the manufacturer has specific instructions on servicing and lubricating the driveshaft. If the manufacturer suggests it is time for a service or if the vehicle has symptoms of a malfunctioning driveshaft, then it should be done immediately. These parts are under a lot of force and will usually fail when the car is in motion. While under the vehicle, inspect all of the connections along the drivetrain and keep an eye out for any parts that seems excessively worn. Bring a rag and wipe any mud or dust off to check for damage.

What are the common symptoms indicating you need to lubricate the driveshaft?

  • Clicking or grating sounds while the vehicle is in gear
  • Vibration in the vehicle while it is running

How important is this service?

This service is very important. Poor lubrication is one of the top reasons why driveshafts fail. When they do fail, driveshafts will fail while in motion and can take out more expensive parts around them. These preventative maintenance steps are extremely important in order to avoid more costs down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,647)

Rating Summary
5,256
190
54
28
119
5,256
190
54
28
119

Nicholas

11 years of experience
591 reviews
Nicholas
11 years of experience
Mercedes-Benz ML320 V6-3.2L - Lubricate Driveshaft - Durham, North Carolina
Very knowledgeable. Very professional.

Kevin

33 years of experience
234 reviews
Kevin
33 years of experience
Mercedes-Benz 300TE L6-3.0L - Alternator - Long Beach, California
Friendly and knowledgeable!!

Levi

9 years of experience
59 reviews
Levi
9 years of experience
Mercedes-Benz ML350 V6-3.5L - Oil Change - Oklahoma City, Oklahoma
Levi was prompt, he explained everything, very respectful and will follow up with me on Thursday because he had to order a special part. Thank you, Levi.

Ralph

38 years of experience
187 reviews
Ralph
38 years of experience
Mercedes-Benz E550 V8-5.5L - Car is not starting - Lakewood, Washington
Prepared, experienced, knowledgeable, and personable.

Excellent Rating

(5,647)

Rating Summary
5,256
190
54
28
119
5,256
190
54
28
119
Number of Mercedes-Benz services completed
62117+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Horn Last?
For For most car owners, staying safe while on the roadways is a top priority. While the roadways can be a dangerous place, there are a variety of things on your car that are there to offer a higher degree...
How Long Does a Main Relay (Computer/Fuel System) Last?
Common signs include the engine not starting, inability to stay running for a long time, and no communication with scan tools.
The Top 5 Selling Cars in Alaska in 2012
Alaska Alaska requires a different kind of vehicle to handle both the terrain and the wintery conditions. While some of the most popular options for the Alaskan terrain in previous years included options such as the Subaru Forester and the...

Can't find a ecu.

You can use the engine but you are going to have a hard time getting it to work since the two years are a generation apart when it comes to the computer systems. The 1994 was an OBD1 and the...

Air idle control valve bad? Loss of power and sluggish

You should have a second opinion on the part that needs replaced. The engine has a throttle body that is electronic and controls power. There are other sensors involved that can control the loss of power. You should have the...

I am getting the P200A check engine light

The trouble code that you have listed is associated with a known problem for the intake manifold runner control system. There are some 2011 and 2012 model year vehicles that have a current recall to have the control module reprogrammed...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com