Mercedes-Benz AMG GT R Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(283)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(283)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Mercedes-Benz AMG GT R Serpentine/Drive Belt Replacement is $190 with $50 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz AMG GT RV8-4.0L TurboService typeSerpentine/Drive Belt ReplacementEstimate$254.00Shop/Dealer Price$282.35 - $359.30
Show example Mercedes-Benz AMG GT R Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(283)

Rating Summary
273
5
1
0
4
273
5
1
0
4

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Mercedes-Benz C300 V6-3.0L - Serpentine/Drive Belt - Charlotte, North Carolina
Fast service, very professional.

Kurt

39 years of experience
33 reviews
Kurt
39 years of experience
Mercedes-Benz ML500 V8-5.0L - Serpentine/Drive Belt - Boca Raton, Florida
Excellent Service!! Very Knowledgeable!!

Christopher

17 years of experience
54 reviews
Christopher
17 years of experience
Mercedes-Benz ML430 V8-4.3L - Serpentine/Drive Belt - Houston, Texas
Good and efficent service with customer as priority

Jacob

13 years of experience
329 reviews
Jacob
13 years of experience
Mercedes-Benz SLK230 L4-2.3L Turbo - Serpentine/Drive Belt - The Colony, Texas
Jacob was awesome showed up on time and had to problem identified quickly. Very polite and excellent communications skills will definitely use him again for my Mercedes needs.

Excellent Rating

(283)

Rating Summary
273
5
1
0
4
273
5
1
0
4
Number of Mercedes-Benz Serpentine/Drive Belt Replacement services completed
3113+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Can’t I Top Off My Tank?
Nearly Nearly everyone who has been behind the wheel of a vehicle has pumped gas into the fuel tank until the tank was full. When the tank is full, the nozzle makes a ‘clunk’ sound and the gas stops flowing....
P0150 OBD-II Trouble Code: O2 Sensor Circuit Malfunction (Bank 2, Sensor 1)
P0150 P0150 code definition O2 Sensor Circuit Malfunction (Bank 2 Sensor 1) What the P0150 code means P0150 is the OBD-II generic code indicating the O2 sensor 1 for bank 2 fails to meet the minimum or maximum voltage limits...
A Buyer’s Guide to the 2012 Chevrolet Volt
Whether Whether you’re concerned about the environment or just want a vehicle that allows you to use less gas, the 2012 Chevrolet Volt might be just right for you. Designed to run entirely via an electric current, this electric hybrid...

Broken ignition will it start if I replace the whole steering column ?

Hello there, a few different things can cause the ignition to brake. If the ignition was broken due to a theft, then the usual repair would be to replace the ignition switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-switch) and key cylinder (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-lock-cylinder). It would be...

Jerking/studdering problem

Hi, thanks for writing in. This is a common sign of a failing mass air flow sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-mass-airflow-sensor). This is a unit that regulates the air flow (https://www.yourmechanic.com/article/what-does-the-mass-airflow-sensor-do) into the engine as it is mixed with fuel prior to being...

Radio not very loud at full volume

Hello there. Many faults will cause your 1999 Ford Expedition to have low output from the stereo. The most common faults would be blown speakers, a failing radio, or a wiring harness fault. A qualified Technician such as one from...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com