logo

Mercedes-Benz AMG GT Black Series Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,730)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(5,730)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Mercedes-Benz AMG GT Black Series Brake Drum Replacement is $450 with $198 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeBrake Drum ReplacementEstimate$696.50Shop/Dealer Price$830.91 - $1154.77
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeBrake Drum ReplacementEstimate$648.50Shop/Dealer Price$782.99 - $1106.90
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeBrake Drum ReplacementEstimate$648.50Shop/Dealer Price$782.98 - $1106.89
Show example Mercedes-Benz AMG GT Black Series Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)
Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Theodore

16 years of experience
1638 reviews
Request Theodore
Theodore
16 years of experience
Request Theodore
by Ken
Mercedes-Benz SL500 V8-5.0L - Battery - Seattle, Washington
Excellent Service and Knowledge Theodore was early for the appointment. He started to work as I explained where we were with the car. He found the root of the problem, alternator and gave me and idea of pricing. I will definitely have Theodore finish the job. Thanks again for your service.

Efrain

20 years of experience
93 reviews
Request Efrain
Efrain
20 years of experience
Request Efrain
by Karen
Mercedes-Benz E320 L6-3.2L - Windows - Bowie, Maryland
Arrived promptly

Collins

12 years of experience
532 reviews
Request Collins
Collins
12 years of experience
Request Collins
by Teressa
Mercedes-Benz S550 V8-4.7L Turbo - Coolant is leaking - Roswell, Georgia
Very knowledgeable and professional. Arrived on time and answered all my questions

Reginald

37 years of experience
99 reviews
Request Reginald
Reginald
37 years of experience
Request Reginald
by Christopher
Mercedes-Benz S550 V8-5.5L - Battery - Los Angeles, California
Very courteous and helpful. A solid mechanic who’s not afraid to get in there and get the job done. Also, considerate and customer focused

Excellent Rating

(5,730)
Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How to Choose a Jeep Grand Wagoneer
Due Due to a recent surge in popularity, the Jeep Grand Wagoneer is making a comeback. Since the vehicle was manufactured only throughout the sixties, seventies, eighties, and the early nineties, most Jeep Grand Wagoneers are no longer on the...
Read more
P2503 OBD-II Trouble Code: Charging System Voltage Low
P2503 code definition Charging System Voltage Low What the P2503 code means This diagnostic trouble code (DTC) (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system) indicates that the powertrain...
Read more
P2767 OBD-II Trouble Code: Input/Turbine Speed Sensor B Circuit No Signal
P2767 means there is a problem in the input or turbine speed sensor B due to faulty sensors or solenoids, an electrical issue or transmission fluids.
Read more

Turbo is not boosting - is this fixable?

Hello. If your engine is not boosting properly then it may be related to the actuator. In most cases turbo wastegate actuators should be difficult to move by hand, as they are designed to open up as boost pressure increases....
Read more

Does a 1994 Cadillac Deville have a crankshaft sensor or do I need to replace the whole distributor?

Hi there. The ignition system for the 4.9L in your vehicle, should be HEI (high energy ignition) and does not have a CKP (crankshaft position sensor). The pick-up coil is inside the distributor and most likely is not the cause...
Read more

I have a 2011 Chevy Aveo LT. When I have the AC on at idle the vehicle overheats. What could be some things to look at? The radiat

Hi there. An overheating problem while idling could be caused by multiple issues, ranging from sludge that is clogging the coolant lines, to a radiator fan that is not activating as well as it should. It is also possible that...
Read more
  1. Home
  2. Estimates
  3. Mercedes-Benz
  4. AMG GT Black Series
  5. Brake Drum Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE