Mercedes-Benz 600SEC Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(28)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(28)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz 600SEC Control Arm Assembly Replacement is $295 with $57 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$464.86Shop/Dealer Price$525.91 - $684.96
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$361.80Shop/Dealer Price$395.66 - $484.97
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$886.42Shop/Dealer Price$1051.51 - $1534.34
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$449.54Shop/Dealer Price$505.41 - $660.57
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$745.84Shop/Dealer Price$864.83 - $1192.94
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$942.32Shop/Dealer Price$1121.80 - $1646.87
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$361.80Shop/Dealer Price$395.78 - $485.18
1993 Mercedes-Benz 600SECV12-6.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$745.84Shop/Dealer Price$859.15 - $1183.01
Show example Mercedes-Benz 600SEC Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(28)

Rating Summary
26
2
0
0
0
26
2
0
0
0

Maxwell

19 years of experience
390 reviews
Maxwell
19 years of experience
Mercedes-Benz S550 V8-5.5L - Control Arm Assembly Replacement (Front Lower Right) - Spring, Texas
Very prompt and professional, highly recommended .

Matthew

13 years of experience
183 reviews
Matthew
13 years of experience
Mercedes-Benz E320 V6-3.2L - Control Arm Assembly Replacement (Front Lower Right) - Indianapolis, Indiana
His work was great and fast!

Anthony

29 years of experience
114 reviews
Anthony
29 years of experience
Mercedes-Benz S550 V8-5.5L - Control Arm Assembly Replacement (Front Lower Right) - Farmingville, New York
Once again Anthony went above and beyond my expectations. I couldn’t be happier and more confident knowing he is my mechanic. True story

Elias

15 years of experience
225 reviews
Elias
15 years of experience
Mercedes-Benz CLK350 V6-3.5L - Control Arm Assembly Replacement (Front Lower Right) - Staten Island, New York
Awesome and quick job

Excellent Rating

(28)

Rating Summary
26
2
0
0
0
26
2
0
0
0
Number of Mercedes-Benz Control Arm Assembly Replacement services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0011 OBD-II Trouble Code: Camshaft Position A - Timing Over-Advanced or System Performance (Bank 1)
P0011 code definition Camshaft Position “A” - Timing Over-Advanced or System Performance (Bank 1) What the P0011 code means P0011...
How is Car Performance Defined?
There There are a lot of us who want a little red Corvette in our lives. It’s fast, handles well, and let’s face it, a high performance car makes you look good on an open and windy road. You might...
A Buyer’s Guide to the 2012 Chevrolet Colorado
The The 2012 Chevrolet Colorado is the perfect size pickup for running errands on the weekend and doing light duty chores around the yard. For those who don’t need a full size pickup, the Colorado offers almost everything a full...

How do I adjust the tilt of the steering column?

On the left side of the steering wheel, underneath the multifunction lever, is the steering wheel tilt lever. Pull this lever out with your left hand, and, while the lever is still engaged, tilt the steering wheel with your right...

What could be the reason the front shakes when I go over 60mph.? Thank you for your help.

Hi...unbalanced wheels and tires, tire defects and bent wheels, and loose, worn out suspension parts are the typical causes of vehicle front end vibration at speed. It is also possible that loose, or defective, motor mounts can be a cause...

Shuts off when I put it into reverse or drive. Alternator shakes erratically

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com