Mercedes-Benz 350SDL Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Mercedes-Benz 350SDL Exhaust Gas Recirculation/EGR Valve Replacement is $480 with $340 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mercedes-Benz 350SDLL6-3.4L Turbo DieselService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$835.64Shop/Dealer Price$1012.10 - $1527.31
1991 Mercedes-Benz 350SDLL6-3.4L Turbo DieselService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$826.63Shop/Dealer Price$1000.00 - $1512.89
Show example Mercedes-Benz 350SDL Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(23)

Rating Summary
22
0
0
0
1
22
0
0
0
1

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Mercedes-Benz ML320 V6-3.2L - Exhaust Gas Recirculation/EGR Valve Replacement - Portland, Oregon
Andrew was very friendly and professional. He worked quickly and resolved the service issue I requested. Thank you!

John

33 years of experience
1126 reviews
John
33 years of experience
Mercedes-Benz E500 V8-5.0L - Exhaust Gas Recirculation/EGR Valve - Pearland, Texas
Excellent

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
Mercedes-Benz ML350 V6-3.7L - Exhaust Gas Recirculation/EGR Valve - Rancho Cordova, California
Once again outstanding!!!!!!!

Robert

28 years of experience
333 reviews
Robert
28 years of experience
Mercedes-Benz E500 V8-5.0L - Exhaust Gas Recirculation/EGR Valve - Washington, District of Columbia
Robert was very professional, prompt and knowledgeable. I will use him for all my future repairs.

Excellent Rating

(23)

Rating Summary
22
0
0
0
1
22
0
0
0
1
Number of Mercedes-Benz Exhaust Gas Recirculation/EGR Valve Replacement services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P2291 OBD-II Trouble Code: Injector Control Pressure Too Low - Engine Cranking
P2291 Code Definition Injector Control Pressure Too Low - Engine Cranking What the P2291 code means This trouble code will only be...
Is It Time to Upgrade Your OBD Scanner?
Automotive technician jobs require OBD scanners. Use yours when a problem is obvious to check if you need to upgrade your Onboard Diagnostics scanner.
How Long Does a Wastegate Hose Last?
Buying Buying a car with a turbo booster is a great way to get the increased horsepower that you are looking for. Just like any other part of the car, the turbo unit has a number of different parts that...

How do I personalize the power door locks settings?

You can customize many of your vehicle’s settings using the vehicle personalization system. One of the areas of the vehicle that you can customize is the power door locks. When personalizing the power door locks you can change which doors...

Lincoln LS cranks but won't start. Checked fuel pump fuses/relay, all good changed ckp sensor, it started once. Now it won't

Measure fuel pressure on the fuel rail. If the pump turns on, that's hopeful but it doesn't mean there is actual pressure. Also, check for actual injector operation using a noid light. Is there an actual spark at the spark...

My car wants to stall when it's idling. Especially at a stop light. It stalled out almost completely until I put some antifreeze coolant, which was a little low but not empty. I am frustrated.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com