Mercedes-Benz 300CE Brake System Flush at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(96)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(96)

Brake System Flush Service

How much does a Brake System Flush cost?

On average, the cost for a Mercedes-Benz 300CE Brake System Flush is $159 with $19 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mercedes-Benz 300CEL6-3.0LService typeBrake System FlushEstimate$207.96Shop/Dealer Price$227.50 - $271.95
1993 Mercedes-Benz 300CEL6-3.2LService typeBrake System FlushEstimate$198.95Shop/Dealer Price$215.40 - $257.53
1991 Mercedes-Benz 300CEL6-3.0LService typeBrake System FlushEstimate$198.95Shop/Dealer Price$215.44 - $257.60
1990 Mercedes-Benz 300CEL6-3.0LService typeBrake System FlushEstimate$198.95Shop/Dealer Price$215.44 - $257.60
Show example Mercedes-Benz 300CE Brake System Flush prices

What is a brake system flush all about?

Brake fluid is essential for the operation of a car’s brakes. When you push the brake pedal, the brake fluid causes the brake pads to press against the rotors, making the car slow down and stop. Over time, the brake fluid absorbs air, moisture, sludge and other contaminants and gets contaminated. Air in the brake fluid causes braking to feel spongy and significantly reduces braking efficiency. A brake system flush includes removing the existing fluid and moisture out of the system and replacing it with new, clean, fluid. A brake fluid flush ensures proper brake system performance and increases the lifespan of your brake system components.

Keep in mind:

A mobile mechanic will use a hand-held vacuum pump and/or atmospheric pressure to remove the fluid. While it is not as powerful as a pressure bleeder, this is an industry approved method of bleeding your brakes. It gets the job done and provides the convenience of a mechanic coming to you.

How it's done:

  • Remove contaminated brake fluid
  • Add new brake fluid
  • Bleed the brakes
  • Clean any surfaces where brake fluid has spilled during the bleeding process
  • Check for fluid leaks
  • Inspect brake pads, rotors and hoses
  • Test drive car

Our recommendation:

Please follow the manufacturer's maintenance schedule and guidelines regarding fluid maintenance. It is a good practice to change brake fluid every 24,000 miles or 36 months. Always use a fluid recommended by your vehicles manufacturer (do not use silicone based brake fluids if your car needs regular brake fluid).

What common symptoms indicate you may need a brake system flush?

  • Brake fluid appears black or brown indicating contamination
  • Brake pedal feels spongy
  • Diminished brake system performance

How important is this service?

If you do not regularly flush your brake system, it will end up costing you more money down the road. As the fluid becomes contaminated, it will eventually cause brake system components to fail and leak. This will also lead to diminished brake system performance, causing a safety concern.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(96)

Rating Summary
92
2
2
0
0
92
2
2
0
0

Shane

18 years of experience
379 reviews
Shane
18 years of experience
Mercedes-Benz 300CE L6-3.0L - Control Arm Assembly Replacement (Rear Lower Left, Rear Lower Right) - Austin, Texas
Punctual, professional, proficient, and positive.paradigm prognosticator.

Manuel

13 years of experience
140 reviews
Manuel
13 years of experience
Mercedes-Benz C300 V6-3.0L - Brake System Flush - Naples, Florida
A very pleasant experience.

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Mercedes-Benz C350 V6-3.5L - Brake System Flush - Los Angeles, California
Kenneth is generally good. Bleeding the brakes is part and parcel of changing the fluid. This should be part of the service.

Simon

31 years of experience
109 reviews
Simon
31 years of experience
Mercedes-Benz CLK350 V6-3.5L - Brake System Flush - Albuquerque, New Mexico
On time. Very professional. Gave car a 50 point check. Advised me on the brake pedal question I had. All excellent,!

Excellent Rating

(96)

Rating Summary
92
2
2
0
0
92
2
2
0
0
Number of Mercedes-Benz Brake System Flush services completed
1056+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Maine
In the furthest north portion of New England, Maine is almost like a world unto itself. Its residents have such a unique accent and friendly manner that it seems almost foreign to the uninitiated, and there are so many natural...
How to Replace a Backup Light Switch
The backup light switch connects to your transmission and turns on when you shift into reverse. This switch lets drivers know that you are backing up.
How to Buy Good Quality Rims
Keeping Keeping your vehicle wheeling along requires more than just tires – you also need rims; and not necessarily some super-slick shiny monster rims, either. The size of the wheels and the rims are important and relate directly to how...

Seatbelt warning when no one in seat

This is a failure of the seat occupant sensor. This is very common on your vehicle. The sensor fails and makes the computer think that there is someone in the seat. The sensor would need to be replaced as the...

Airconditioning system off before start & warming up the engine before driving

I always recommend allowing the car to run until warm in cold or hot conditions. I wait for the engine to run until the idle hits the base idle speed (around 700-800 RPM) before driving it. This allows the oil...

Not starting

The most common cause of an no start with no spark is going to be the crankshaft sensor causing the no start. The vehicle should be scanned to see if there is an input from the crankshaft sensor to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com