Mazda Tribute Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(264)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(264)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mazda Tribute Power Steering Pressure Hose Replacement is $274 with $92 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mazda TributeL4-2.5L HybridService typePower Steering Pressure Hose ReplacementEstimate$901.80Shop/Dealer Price$1081.56 - $1610.29
2008 Mazda TributeL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$612.81Shop/Dealer Price$720.95 - $1040.00
2002 Mazda TributeL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$555.85Shop/Dealer Price$649.78 - $926.14
2005 Mazda TributeV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$570.19Shop/Dealer Price$667.70 - $954.81
2009 Mazda TributeV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$416.86Shop/Dealer Price$468.01 - $609.47
2002 Mazda TributeV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$516.91Shop/Dealer Price$601.28 - $848.57
2006 Mazda TributeL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$459.85Shop/Dealer Price$529.80 - $734.17
2008 Mazda TributeL4-2.3L HybridService typePower Steering Pressure Hose ReplacementEstimate$890.09Shop/Dealer Price$1067.58 - $1594.61
Show example Mazda Tribute Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(264)

Rating Summary
253
7
1
1
2
253
7
1
1
2

Shane

12 years of experience
68 reviews
Shane
12 years of experience
Tribute 2005 - Fuel Pressure Regulator - Round Rock, TX
On time, knowledgeable, and professional as always.

James

21 years of experience
49 reviews
James
21 years of experience
Tribute 2005 - Check Engine Light is on - Douglasville, GA
James did a great job on checking my vehicle out and figuring out what the problem was , and giving a estimate of what it will take to fix it.

Theodore

10 years of experience
1656 reviews
Theodore
10 years of experience
Tribute 2004 - Fuel Tank Pressure Sensor - Lynnwood, WA
He was on time, confirmed what was wrong and fixed it in a timely manner. I'm thrilled with his professionalism and service! Will definitely ask for Theodore again if I need a repair.

Luis

13 years of experience
142 reviews
Luis
13 years of experience
Tribute 2002 - Serpentine/Drive Belt - Henderson, NV
Luis was excellent. He was willing to work late one day to get my car fixed as soon as possible, and the service was much cheaper than any other quote I received. Super happy with the service. Thank you Luis!

Excellent Rating

(264)

Rating Summary
253
7
1
1
2
253
7
1
1
2
Number of Mazda Tribute services completed
2904+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Know What Type of Gas to Use
Your Your vehicle is propelled by a combustion engine. That means that fuel is injected into the engine’s cylinders in some fashion, where it combusts, or burns, to create downward force against a piston in the cylinder, turning a crankshaft...
P0321 OBD-II Trouble Code: Ignition/Distributor Engine Speed Input Circuit Range/Performance
P0321 P0321 code definition Ignition/Distributor Engine Speed Input Circuit Range/Performance What the P0321 code means P0321 is an OBD-II generic code that the engine control module (ECM) detected the engine speed input sensor circuit out of range or its performance...
How to Get a North Carolina Driver's Permit
The The graduated driver’s license program in the state of North Carolina requires all new drivers under 18 years old to begin driving under supervision, in order to practice safe driving before getting their full driver’s license. In order to...

My car won't start

Generally, the most common cause of a no start (https://www.yourmechanic.com/article/how-to-fix-a-car-that-won-t-start-by-rocco-lovetere) is the battery. Other causes are the fuel pump, starter, ignition switch, and the neutral safety switch. With the car turning off over speed bumps, that actually sounds completely related....

Dead battery first time out in below zero weather

Your vehicle battery may be prone to weak batteries when the temperature drops below zero. Have the battery and charging system checked to make sure battery is good and system is charging the battery good. I would then recommend checking...

P1071 p0174 p1083 2002 bmw 530i

A number of things may cause codes P0171, P0174 and P1083 to be triggered. As the codes indicate, this means there is a lean fuel condition which may be caused by a lack of fuel supply or in some cases,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com