Mazda Tribute Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(275)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(275)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mazda Tribute Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mazda TributeL4-2.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2008 Mazda TributeL4-2.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Mazda TributeV6-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Mazda TributeL4-2.5L HybridService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2006 Mazda TributeV6-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2008 Mazda TributeL4-2.3L HybridService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Mazda TributeL4-2.3LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2005 Mazda TributeL4-2.3LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda Tribute Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(275)

Rating Summary
264
7
1
1
2
264
7
1
1
2

Quint

11 years of experience
21 reviews
Quint
11 years of experience
Mazda Tribute V6-3.0L - Oil Change - McDonough, Georgia
Quint was on time to repair my suv. He was a constant professional. He has a great attitude and is a very pleasant young man.His customer service skills are are superb. He represents your mechanic company great. Keep up the great work Quint.

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
Mazda Tribute V6-3.0L - Other Inspections - Pflugerville, Texas
great

Manuel

41 years of experience
132 reviews
Manuel
41 years of experience
Mazda Tribute V6-3.0L - Starter - San Antonio, Texas

James

31 years of experience
690 reviews
James
31 years of experience
Mazda Tribute L4-2.3L - Thermostat - Buena Park, California
James arrived early than schedule appointment, awesome. Professional and courteous, provided clean work area. Highly recommend.

Excellent Rating

(275)

Rating Summary
264
7
1
1
2
264
7
1
1
2
Number of Mazda Tribute services completed
3025+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Accelerator Pump
Nestled Nestled down in the carburetor’s fuel bowl is a little pump that provides extra sprays of needed fuel in situations like starting the car or passing on the highway. Fuel-injected vehicles do not need this pump; it is only...
P0388 OBD-II Trouble Code: Crankshaft Position Sensor B Circuit High Input
P0388 means an excessive high volt signal from the crankshaft sensor was detected by the car's computer.
How to Get Smog Technician Certified in Washington
Automotive technician jobs include smog certified emissions inspectors. In Washington, you need to work at an authorized testing station.

How do I alter the cruise control speed?

You can adjust the cruise control speed while the system is in use. To increase the speed, press the RES/+ button. Pressing this button will increase the speed by 1mph. Pressing and holding the button will increase the speed consistently...

Choose a carburetor for 454 Chevy engine

Hi there. For the carburetor (https://www.yourmechanic.com/services/carburetor-replacement) swap out, you will need to have a least a CFM of 850 or 950 for a big block GM engine. If you are concerned about fuel consumption, then you could do a CFM...

I have a 1990 honda accord 4 door sedan and i spent 2 weaks going through alot to replace my water pump and i finally got the wate

If the car is overheating without a thermostat and the water pump is new and being driven at sufficient speed, you might have a blockage, such as in the radiator. Other causes of overheating include low coolant level (including that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com