Mazda RX-7 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(17)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(17)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mazda RX-7 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1983 Mazda RX-7R2-1.1LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1988 Mazda RX-7R2-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1985 Mazda RX-7R2-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Mazda RX-7R2-1.3L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1987 Mazda RX-7R2-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1984 Mazda RX-7R2-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Mazda RX-7R2-1.3LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1991 Mazda RX-7R2-1.3L TurboService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda RX-7 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Mauricio

40 years of experience
85 reviews
Mauricio
40 years of experience
Mazda RX-7 R2-1.3L - Oil/Fluid Leak - Los Angeles, California
He did a great job of the inspection of the vehicle.

Gregory

31 years of experience
383 reviews
Gregory
31 years of experience
Mazda RX-7 R2-1.3L Turbo - Clutch pedal goes all the way to the floor - Parker, Colorado
Gregory did a great job! Knowledgeable, efficient, friendly, well equipped!

Richard

13 years of experience
601 reviews
Richard
13 years of experience
Mazda RX-7 R2-1.3L - Serpentine/Drive Belt - Las Vegas, Nevada
Very professional highly recommend

Mike

13 years of experience
176 reviews
Mike
13 years of experience
Mazda RX-7 R2-1.3L - Car is not starting - Morrisville, North Carolina
Outstanding. Mike is a competent and knowledgeable professional. I was very pleased with the service, and his ability to quickly diagnose and resolve the issue. Thanks Mike

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Mazda RX-7 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Throttle Control Cable Last?
As As you drive through the streets and encounter different speed limits, you rely on the accelerator to speed up when needed. This is done through the use of the throttle control cable, which is also called the accelerator cable....
How to Renew Your Car Registration in Rhode Island
There There are a number of things that a person will have to do in the state of Rhode Island in order to drive legally. Among the most important things that you will need to do in order to stay...
P0522 OBD-II Trouble Code: Engine Oil Pressure Sensor/Switch Low Voltage
P0522 code means the sensor is indicating too low of an oil pressure value due to faulty sensor, low oil, or sensor circuit.

My vehicle was hotwired and vandalized

There will be a few things that will need to be addressed. A qualified mechanic, like one from YourMechanic, will need to drain all the gas/sugar from the gas tank and all lines. And the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) and wiring...

Could the Traction Control System (TCS) lock your wheels?

Hi there. Your vehicle is designed to haul lots of weight and a trailer behind it. The noise could be from the traction control system (TCS) activating when in a turn. If a wheel speed sensor is not functioning correctly,...

How do you figure out which engine mounts actually need replacing?

With all most 200k miles you most likely have all four mounts needing replacement. The first thing to do is to physically look at each one and look for rips or tears in rubber, sagging or oil soaked. Once all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com