Mazda Protege5 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(72)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(72)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Mazda Protege5 Throttle Body Replacement is $593 with $341 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Mazda Protege5L4-2.0LService typeThrottle Body ReplacementEstimate$1161.30Shop/Dealer Price$1388.36 - $2054.94
2002 Mazda Protege5L4-2.0LService typeThrottle Body ReplacementEstimate$944.34Shop/Dealer Price$1118.03 - $1631.68
Show example Mazda Protege5 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(72)

Rating Summary
68
3
0
0
1
68
3
0
0
1

Kenneth

17 years of experience
113 reviews
Kenneth
17 years of experience
Mazda Protege5 L4-2.0L - Trunk Lift Support Shocks - Emeryville, California
It was a pleasure to have Kenneth come by and take care of our care. He was able to come earlier and called to confirm that this would work with my schedule. We was very professional, knowledgeable and friendly. I appreciated that he explained what he was doing and how I could maintain my car with simple suggestions. It was a nice feeling to be dealing with someone who was straightforward and honest. I highly recommend him!

Chi

26 years of experience
6 reviews
Chi
26 years of experience
Mazda Protege5 L4-2.0L - Oil Change - Castro Valley, California
Chi was awesome! He did everything and then some. Would definitely recommend him to anyone.

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
Mazda Protege5 L4-2.0L - Radiator Hose Repair - Tampa, Florida
Great price and service. Came early. Highly recommend

Rod

18 years of experience
210 reviews
Rod
18 years of experience
Mazda Protege5 L4-2.0L - Battery - Boynton Beach, Florida
Rod was a very likable, up-front guy. Immediately diagnosed the problem and took steps to make sure it was fixed ASAP. The service was more expensive than if I had handled it myself, but it was more than worth the extra bucks to have someone else take care of it from start to finish. This was my first use of MY MECHANIC, but I would use them again with no reservations. Worth the money.

Excellent Rating

(72)

Rating Summary
68
3
0
0
1
68
3
0
0
1
Number of Mazda Protege5 services completed
792+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How Is a Dirty Light Bulb Socket Cleaned?
Your Your car’s light bulb sockets are protected by lenses, so they won’t get as dirty as they might, but they will still accumulate dirt and grime over the years. Regular cleaning can help ensure they remain functional for a...
How Long Does an AC Control Module Last?
Over Over the past decade, vehicles have become far more electronic than they are mechanical, with numerous computers on board that control various functions. Your AC control module is one such computer, and it works to manage the air conditioning...
Cell Phones and Texting: Distracted Driving Laws in Wyoming
Distracted Distracted driving is defined as anything that takes the eyes off of the road, mind off of driving, and the hands off of the steering wheel while operating a motor vehicle. Since 2008, every year there has been an...

Given error codes P0012 and P0022

If your vehicle was built prior to April 2009, there is a TSB for this exact issue. When both of these codes appear simultaneously, it is the fault of the timing solenoids. The TSB states to replace the timing solenoids...

Engine turns off when the first gear is shifted

Hello. The most common cause of the car dying once it is put into gear is the transmission torque converter or the fluid level of the transmission. If there are leaks present from the transmission, I would suspect the fluid...

Clicking from fuses/relays

This is a very common issue with many cars when the starter relay (https://www.yourmechanic.com/services/starter-relay-replacement) goes bad. This is a small relay that directs power from the battery to the starter that causes the starter to engage. When this is faulty,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com