Mazda Protege5 Idle Control Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(71)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(71)

Idle Control Valve Replacement Service

How much does a Idle Control Valve Replacement cost?

On average, the cost for a Mazda Protege5 Idle Control Valve Replacement is $405 with $310 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mazda Protege5L4-2.0LService typeIdle Control Valve ReplacementEstimate$735.19Shop/Dealer Price$900.24 - $1372.89
2003 Mazda Protege5L4-2.0LService typeIdle Control Valve ReplacementEstimate$715.19Shop/Dealer Price$880.26 - $1352.92
Show example Mazda Protege5 Idle Control Valve Replacement prices

What is the Idle Control Valve all about?

The Idle Control Valve is designed to control and maintain a consistent engine idle speed. The valve helps counter anything the driver may do to put extra load on the engine, such as turn on the air conditioning, sound systems, lights, etc. When the car is cold, the idle control valve helps the engine start.

Keep in mind:

The idle control valve usually goes bad because of excessive carbon buildup in the intake manifold.

How it's done:

  • Scan the computer system in the car for codes.
  • Check for any vacuum leaks.
  • Check electrical connections.
  • Remove and replace the idle air control valve if faulty.
  • Clean carbon out of intake manifold ports.
  • Clear Engine Check light.

Our recommendation:

It is a good idea to get an air induction service performed every 3 to 4 years. This will ensure that the carbon does not build up on the valve. When you are getting the idle control valve replaced, your mechanic should inspect the vacuum lines for leaks. If the vacuum is leaking, it will mimic the symptoms of a bad IAC valve.

What common symptoms indicate you may need to replace the Idle Control Valve?

  • When the engine is idle, (car not moving), the engine may stall.
  • Excessive racing noise from the engine.
  • Engine may shut off if AC is turned on.
  • Check Engine light is on.

How important is this service?

The idle control valve is responsible for maintaining a constant and consistent engine. It achieves this by ensuring that the idle speed is always constant. Many factors – such as a cold engine, the radio, or the air conditioning – effect the idling speed of the engine, so the idle control valve neutralizes these outside factors, and makes sure that the engine is consistently idling at a stable speed. When the idle control valve malfunctions, the idling speed is no longer regulated. This means that if you turn on the radio or the air conditioning, which requires power, your engine may stall. It also means that your vehicle may not be able to turn on.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(71)

Rating Summary
67
3
0
0
1
67
3
0
0
1

Ejnar

29 years of experience
107 reviews
Ejnar
29 years of experience
Mazda Protege5 L4-2.0L - Clutch Slave Cylinder - San Jose, California
EJ was very patient, I hung around and he explained how the dysfunctional parts were effecting the clutch of my car. Before beginning the removal of my old clutch master/slave cylinders he performed a diagnostic to ensure that the service I booked was what my car needed. EJ has very good bedside manner and was genuinely a nice person to be around. Once again a great experience with Your Mechanic, I will continue to use the web site and service for future repairs.

Nathaniel

16 years of experience
101 reviews
Nathaniel
16 years of experience
Mazda Protege5 L4-2.0L - Pre-purchase Car Inspection - Decatur, Georgia
Very polite and super helpful. Called to come by early (amazing! Who runs early? Nathaniel!). His diagnostics revealed what we needed to know about the car we were going to buy and saved us from a lemon. Thank You!!!

Terry

18 years of experience
51 reviews
Terry
18 years of experience
Mazda Protege5 L4-2.0L - Oxygen Sensor Replacement (Rear/Lower/Downstream) - Atlanta, Georgia
It was a bit frustrating having an appointment cancellation and then having Terry arrive 1.5 hours late for the make up appointment without great communication. However, the service, once he arrived was friendly and competent. We installed my O2 sensor quickly (I had trouble disconnecting the old one).. The car still wasn't running right and he gave me some advice for a couple more things to try to get it running right. He also helped me pull out a broken spark plug boot that was stuck in the valve. I love the fact that I can purchase my own parts and do my own work and get some assistance for a reasonable price. It's amazing how much money this saves. A shop, or if they buy your O2 sensor for you- you pay 250-400. But here i could buy a quality part online for 35 and get it installed for 75. And I like that they'll help teach me how to do my own work on the car.

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mazda Protege5 L4-2.0L - Starter - Laurel, Maryland
Richard thanks your help, you were great definitely will use you again for future services

Excellent Rating

(71)

Rating Summary
67
3
0
0
1
67
3
0
0
1
Number of Mazda Protege5 services completed
781+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Coolant Level Sensor Last?
The The coolant level sensor uses a moveable float device and a reed switch that senses when the radiator has low coolant. Once the sensor detects low coolant, the driver is alerted by a light illuminated on the dashboard. The...
How to Get Volvo Dealership Certified
Volvo dealerships offer automotive technician jobs to mechanics who are certified through the Volvo Service Automotive Factory Education program.
The Difference Between Shocks and Struts
Shocks and struts are often referred to interchangeably as they perform the same function, however, they differ in suspension system design.

Sunroof leak

Leaking sunroofs are never fun to repair. Most of the time the problem on your car is clogged sunroof drains. With the sunroof open use compressed air to blow the drains clear. If they are clear or if this does...

P1659 ETCS RELAY OFF MALFUNCTION

Hi there, thanks for writing in. Unfortunately since your vehicle seems to be one not sold in the United States, I can't access any repair information for your N-WGN. The information should be readily available in a service manual for...

RPM meter jumps wildly when accelerating.

Hello there. A few common faults will cause your 2004 Chevrolet Aveo to have a fluttering tachometer. The most common is a misfire condition (https://www.yourmechanic.com/article/how-can-problems-with-the-ignition-system-cause-misfiring_2), vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak), faulty tachometer itself, or a wiring harness fault. In order to have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com