Mazda MX-3 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mazda MX-3 Power Steering Pump Replacement is $408 with $212 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mazda MX-3L4-1.6LService typePower Steering Pump ReplacementEstimate$948.48Shop/Dealer Price$1136.39 - $1688.78
1995 Mazda MX-3V6-1.8LService typePower Steering Pump ReplacementEstimate$938.10Shop/Dealer Price$1103.30 - $1590.64
1995 Mazda MX-3L4-1.6LService typePower Steering Pump ReplacementEstimate$637.27Shop/Dealer Price$748.09 - $1074.70
1994 Mazda MX-3L4-1.6LService typePower Steering Pump ReplacementEstimate$637.27Shop/Dealer Price$748.09 - $1074.70
1993 Mazda MX-3L4-1.6LService typePower Steering Pump ReplacementEstimate$637.27Shop/Dealer Price$750.15 - $1078.31
1993 Mazda MX-3V6-1.8LService typePower Steering Pump ReplacementEstimate$715.56Shop/Dealer Price$825.45 - $1146.13
1992 Mazda MX-3L4-1.6LService typePower Steering Pump ReplacementEstimate$637.27Shop/Dealer Price$748.11 - $1074.74
1994 Mazda MX-3V6-1.8LService typePower Steering Pump ReplacementEstimate$715.56Shop/Dealer Price$825.17 - $1145.64
Show example Mazda MX-3 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(20)

Rating Summary
19
1
0
0
0
19
1
0
0
0

Cesar

33 years of experience
4 reviews
Cesar
33 years of experience
Mazda MX-3 L4-1.6L - Pre-purchase Car Inspection - Arcadia, California
Excellent service! Very informative.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Mazda CX-7 L4-2.5L - Power Steering Pump - Sun City, California
Quick, efficient and informative. Highly recommend

Richard

36 years of experience
104 reviews
Richard
36 years of experience
Mazda CX-7 L4-2.5L - Power Steering Pump - Zephyrhills, Florida
Excellent job. Friendly professional courteous. Would recommend

Genaro

14 years of experience
309 reviews
Genaro
14 years of experience
Mazda CX-9 V6-3.7L - Power Steering Pump - Houston, Texas
Excellent work, timely and reasonable.

Excellent Rating

(20)

Rating Summary
19
1
0
0
0
19
1
0
0
0
Number of Mazda Power Steering Pump Replacement services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in Miami, Florida
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Advance Auto Parts.
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when...
How to Buy a Good Quality Car Stereo/Receiver
Your Your stereo system and receiver are an important aspect of your car. Sure they don't impact how it works, but it certainly helps keep you entertained on those long drives. With that said, many of the systems that come...

Engine stalls out for no reason, what’s wrong?

There a number of things that can cause your vehicle to have this problem. Possible problems include a faulty Mass Airflow Sensor, a Crankshaft Position Sensor, and the Loss of fuel pressure. Intermittent problems can take more time to isolate...

ABS light is on...1999 toyota camry

It sounds like you may have an issue with the ABS control module or the wheel sensors on your vehicle. The ABS control module controls the activation of the ABS system based upon inputs from the ABS wheel sensors. When...

My Acura TL 1999 has a idling problem. It idles high to low. And it takes a while for the gears to switch when I'm reversing and in drive.

For the idle condition, check the (IAC) Idle Air Control Valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) and see if its plugged up. You can take it off and clean it and then put it back on. If the idle continues to be irreratic, then...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com