Mazda CX-3 Valve Cover Gasket Replacement Costs

Car	Service	Estimate	Shop/Dealer Price
2017 Mazda CX-3L4-2.0L	Service typeValve Cover Gasket Replacement	Estimate$300.10	Shop/Dealer Price$325.92 - $392.02
2018 Mazda CX-3L4-2.0L	Service typeValve Cover Gasket Replacement	Estimate$229.09	Shop/Dealer Price$251.70 - $315.40

Car

Service

Estimate

Shop/Dealer Price

2017 Mazda CX-3L4-2.0L

Service typeValve Cover Gasket Replacement

Estimate$300.10

Shop/Dealer Price$325.92 - $392.02

2018 Mazda CX-3L4-2.0L

Service typeValve Cover Gasket Replacement

Estimate$229.09

Shop/Dealer Price$251.70 - $315.40

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(13)

Rating Summary

SEE REVIEWS NEAR ME

Angel

18 years of experience

106 reviews

Request Angel

by Ana

Mazda CX-3 L4-2.0L - Oil Change - Hollywood, Florida

Angel was late about an hour to the appointment. I called twice YourMechanic and I was told he was on his way. My second call was to cancel the appointment but at the moment, he showed up. Then my bill (w/o me noticing) was changed. The price for your quote changed from $73.09 to $92.48. Now the I checked my bank account and didn't notice the charge then I realized it was for this company 'your mechanic'. Why did the price change? Nobody told me at all and apparently I signed the invoice with the higher amount.

Alex

21 years of experience

160 reviews

Request Alex

by Phil

Mazda CX-3 L4-2.0L - Pre-purchase Car Inspection - Downers Grove, Illinois

He put voice memos in his report, which was a great help. He also said that I could call him with any questions. When I called he was very good answering my questions and providing more details. He went above what I asked for in his inspection especially looking for pet hairs in out of the way and hidden places. He also said that I could call again if I had more questions. I'm very happy with Alex!

Ricardo

24 years of experience

199 reviews

Request Ricardo

Mazda CX-3 L4-2.0L - Oil Change - Miami, Florida

Super fast, super professional and super good. Highly recommended. I will trust on him for next issues with my car

Andy

5 years of experience

27 reviews

Request Andy

by KHALILAH

Mazda CX-3 L4-2.0L - Check Engine Light is on - Houston, Texas

Very professional, polite, & knowledgeable

Mazda CX-3 Valve Cover Gasket Replacement at your home or office.

Estimate price near me

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Mazda CX-3 Valve Cover Gasket Replacement is $182 with $42 for parts and $140 for labor. Prices may vary depending on your location.

What is a valve cover gasket and how does it work?

When to consider replacing a valve cover gasket?

How do mechanics replace a valve cover gasket?

Is it safe to drive with a valve cover gasket problem?

When replacing a valve cover gasket keep in mind:

Meet some of our expert Mazda mechanics

Excellent Rating

Rating Summary

Angel

Alex

Ricardo

Andy

Excellent Rating

Rating Summary

Recent articles & questions

Car turned itself off, now Check Engine Light is on

should I replace this alternator or get another car?? I am a senior citizen without a lot of money

My "tire fire fault" light came on how much longer can I drive on it?

How can we help?