Mazda B4000 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Mazda B4000 Car Thermostat Replacement is $227 with $87 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$332.32Shop/Dealer Price$380.25 - $515.94
2001 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$341.95Shop/Dealer Price$392.77 - $541.12
2009 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$341.95Shop/Dealer Price$392.80 - $541.16
2002 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$341.95Shop/Dealer Price$392.80 - $541.16
2000 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$323.31Shop/Dealer Price$370.97 - $506.46
2005 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$341.95Shop/Dealer Price$392.94 - $541.41
2006 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$341.95Shop/Dealer Price$392.81 - $541.19
1996 Mazda B4000V6-4.0LService typeCar Thermostat ReplacementEstimate$319.01Shop/Dealer Price$364.12 - $495.28
Show example Mazda B4000 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(25)

Rating Summary
25
0
0
0
0
25
0
0
0
0

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Mazda B4000 V6-4.0L - Spark Plugs - Norwalk, California
Manuel is MAN!

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Mazda B4000 V6-4.0L - Power Steering Pressure Hose - Mather, California
Knowledge of vehicle was great was on time all around good person

Efrain

21 years of experience
101 reviews
Efrain
21 years of experience
Mazda B4000 V6-4.0L - Clutch pedal goes all the way to the floor - Bowie, Maryland
Efrain performed a full inspection of the truck and explained everything that needed to be repaired. He was very friendly and helpful. Great experience

Rafael

28 years of experience
77 reviews
Rafael
28 years of experience
Mazda B4000 V6-4.0L - Initial Safety Inspection - El Sobrante, California
Very happy.

Excellent Rating

(25)

Rating Summary
25
0
0
0
0
25
0
0
0
0
Number of Mazda B4000 services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

P0272 OBD-II Trouble Code: Cylinder 4 Contribution/Balance Fault
P0272 means that the PCM has identified that the reference voltage in cylinder #4’s fuel injector is out of range due to a faulty fuel injector.
How to Install a Head Unit on a Stereo
Virtually Virtually all vehicles built in the past fifty years come with some sort of audio entertainment system as standard equipment. While most of the original equipment stereos (https://www.yourmechanic.com/article/4-essential-things-to-know-about-your-car-s-stereo-and-speakers) on newer vehicles offer adequate performance, the stereo units found on...
Common Signs Your Drive Belt Is Misaligned
Drive Drive belt problems usually manifest as noise. If you have a noisy drive belt, it’s important to know what’s causing it so that it can be fixed. That means you have to listen. If the drive belt or serpentine...

How do I use the cargo tie-down?

The cargo tie-down is located in the trunk, on the driver side. The tie-down is a small hook that protrudes from the side of the trunk. Hang light items on this hook to keep them from rolling or moving around...

My car only starts if I cover the air intake tube where the air filter goes

This may suggest you have a vacuum leak. When plugging the air intake tube, you are choking the motor off from supplying it with air. If taking your hand off and allowing it to breathe on its own causes it...

When letting off the accelerator, the vehicle will jerk (it feels like a slight back and forth movement)

Hello. I think what we are looking for here are possible problems caused by a "torque-reversal" in the drivetrain. That is, when accelerating or maintaining road speed, the engine/transmission and all the drive links (driveshafts, differentials, transfer case, etc.) have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com