Mazda B4000 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Mazda B4000 Hazard / Turn Signal Flasher Replacement is $123 with $28 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$364.51Shop/Dealer Price$436.89 - $631.53
1996 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$344.51Shop/Dealer Price$416.91 - $611.56
1994 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$344.51Shop/Dealer Price$416.91 - $611.56
2000 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$193.95Shop/Dealer Price$228.69 - $310.40
2004 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$150.53Shop/Dealer Price$174.45 - $223.63
2007 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$193.95Shop/Dealer Price$228.71 - $310.44
1998 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$349.51Shop/Dealer Price$421.77 - $616.32
2005 Mazda B4000V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$198.95Shop/Dealer Price$233.94 - $315.86
Show example Mazda B4000 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(25)

Rating Summary
25
0
0
0
0
25
0
0
0
0

Manuel

32 years of experience
579 reviews
Manuel
32 years of experience
Mazda B4000 V6-4.0L - Check Engine Light is on - Norwalk, California
Great

Rafael

27 years of experience
74 reviews
Rafael
27 years of experience
Mazda B4000 V6-4.0L - Serpentine/Drive Belt - El Sobrante, California
job well done

Mike

13 years of experience
23 reviews
Mike
13 years of experience
Mazda B4000 V6-4.0L - Ignition Cable (Spark plug wires) - Murrieta, California
He was so helpful to me with my car, He showed me everything that was wrong and needed to be fixed and explained why certain stuff being bad can cause other stuff to be faulty

Phillip

17 years of experience
85 reviews
Phillip
17 years of experience
Mazda B4000 V6-4.0L - Oil Change - San Antonio, Texas
Phillip actually arrived early and was non-intrusive while doing the job. He went about his work professionally and quietly; had to look outside a couple of times to see if he was still there. I would certainly recommend Phillip and YourMechanic to friends.

Excellent Rating

(25)

Rating Summary
25
0
0
0
0
25
0
0
0
0
Number of Mazda B4000 services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How Can I Tell If the OBD System Is Working Correctly?
Today’s Today’s cars are far more sophisticated than they once were, and they require a computer to monitor and manage the various systems so that everything works together properly. This also gives you the means to determine if there’s something...
How to Replace an Engine Mount
The engine mounts keep the motor in place. They need to be replaced if there is excessive vibration, impact noises under the hood, or engine movement.
How to Replace a Tailgate Lock Cylinder
A tailgate lock cylinder unlocks the unit that secures the tailgate handle. Signs of failure include a lock that turns endlessly or not at all.

My compressor went out. Will that cause my engine to not operate?

Hello. If you have an engine that is cranking but not starting, then you need to look on dashboard to see if the theft light is flashing first. If it is, then try a different key to see if that...

When the electric power steering system warning comes on, the car immediately loses gas and slows to a halt.... why does it do th

Hi there. Are there any other lights illuminated? When the EPS light does come on, the electric steering system has detected a fault and can cause the vehicle to proceed into what may seem like a limp mode; we wouldn't...

I got a alternator replaced on my car and now the Check Engine Light is on with the Battery Light. My headlights are still blinking.

Hi and thanks for contacting YourMechanic. This sounds like there is a loose ground or a wire was not hooked up to the alternator correctly. Check all of the wiring when that was removed when the alternator (https://www.yourmechanic.com/services/alternator-replacement) and battery...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com