Mazda 929 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mazda 929 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 Mazda 929V6-3.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 Mazda 929V6-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Mazda 929V6-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Mazda 929V6-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1994 Mazda 929V6-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1992 Mazda 929V6-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Mazda 929V6-3.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1993 Mazda 929V6-3.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda 929 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0

Doug

34 years of experience
139 reviews
Doug
34 years of experience
Mazda 929 V6-3.0L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Corona, California
DXCELLENT AND VERY KNOWLEDGEABLE

Mohammed

9 years of experience
152 reviews
Mohammed
9 years of experience
Mazda 929 V6-3.0L - Alternator Repair - Raleigh, North Carolina
Very professional, extremely courteous

Jose

17 years of experience
154 reviews
Jose
17 years of experience
Mazda 929 V6-3.0L - Car Heater Hoses Replacement - Las Vegas, Nevada
Excellent job completed.

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Mazda 3 L4-2.0L - Windows - Denver, Colorado
Jonathon was early and professional as well as very informative towards my car. He answered all my questions and more while also showing me so I didn't feel like I was getting used by some "mechanic". All in all I would recommend him always. He is coming back too do a repair on my left door window this week as well so I won't be waiting to long which is a big plus as well!

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0
Number of Mazda Windows Inspection services completed
11+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Air Charge Temperature Sensor
Common signs include a lack of power when accelerating, trouble when starting in cold weather, and a decrease in fuel efficiency.
P2066 OBD-II Trouble Code: Fuel Level Sensor “B” Performance
P2066 P2066 code definition Fuel Level Sensor “B” Performance What the P2066 code means P2066 is an OBD-II generic code for the engine control module (ECM) detecting the fuel level sensor “B” performance. The sensor output voltage is not accurate...
How to Replace a Fuel Pressure Regulator
Fuel pressure regulators helps the fuel injector let out the right amount of fuel and maintains constant fuel pressure for optimal fuel usage.

replaced bad coil pack and new coil not sparking car starts but runs rough engine light on blinks sometimes

Hello and thank you for your questions. If your engine was rebuilt about 10 months ago, the question is to determine if the management system has been installed as well. With the symptoms that you are having, it sounds like...

My brake lights and head lights won't come on. It's not a blown fuse.

Hello, thanks for writing in. If all of these lights stopped working at the same time then you either have a main switch problem or a voltage issue from the fuse box. From my experience with this vehicle it is...

Having delayed shifting issue with my car. It does it more when you accelerate fast. If you accelerate slow it shifts 2003 Honda CRV

Hi there - your slow-shifting behavior is reported fairly often on this vehicle, with an internal transmission fluid pressure leak (linear solenoid gasket) a common culprit. You don't mention your mileage, but I recommend a fluid and filter change -...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com