Mazda 626 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(134)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(134)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Mazda 626 Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mazda 626L4-2.0LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Mazda 626L4-2.2L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Mazda 626L4-2.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Mazda 626L4-2.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1991 Mazda 626L4-2.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1996 Mazda 626V6-2.5LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1994 Mazda 626L4-2.0LService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1979 Mazda 626L4-2.0LService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda 626 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(134)

Rating Summary
121
10
2
0
1
121
10
2
0
1

Rusty

23 years of experience
514 reviews
Rusty
23 years of experience
Mazda 626 L4-2.0L - Serpentine/Drive Belt - Arlington, Texas
Fast, knowledgeable and friendly!

Joe

43 years of experience
821 reviews
Joe
43 years of experience
Mazda 626 L4-2.0L - Valve Cover Gasket - Saint Petersburg, Florida

Milton

37 years of experience
239 reviews
Milton
37 years of experience
Mazda 626 V6-2.5L - Check Engine Light is on - Las Vegas, Nevada
Honest, polite, and professional. Very thorough with his inspection of my mom's car & listened well to what we thought the issue might be. It turns out what we thought was in bad condition on the car wasn't bad at all & he kept it honest with us and didn't take advantage & charge us anyway. Now that's a great mechanic that you would want in your corner! Thanks Milton

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
Mazda 626 L4-2.0L - Exhaust Flange Gasket - Charlotte, North Carolina
Overall experience was great! I would recommend Jeffrey. Very professional and nice

Excellent Rating

(134)

Rating Summary
121
10
2
0
1
121
10
2
0
1
Number of Mazda 626 services completed
1474+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

P0081 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit (Bank 2)
P0081 P0081 trouble code definition P0081 indicates a generic issue with the intake valve control circuit bank 2. It may be seen with P0082. The vehicle may have a bank 1 and a bank 2 intake solenoid. What the P0081...
Mitsubishi Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Mitsubishi vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
P0447 OBD-II Trouble Code: Evaporative Emission Control System Vent Control Circuit Open
P0447 means there is a component in the EVAP control system that is malfunctioning, likely due to a faulty fuel cap, solenoid, hose, or sensor.

Heater not working

If steam is coming out of your vents, the heater core is leaking. Replacement of the heater core on your particular vehicle requires dashboard removal and should only be attempted by qualified technicians like ones from YourMechanic. They will be...

Have a broken driver side rear main lift support shock, not the two regular left in the right lift supports. Can i replace that?

Hi there. If you are referring to the shock absorbers to the vehicle, then you can fix the brackets that support the shock to the vehicle without having a jack. If you are referring to the air bags that are...

Do i need to add pag oil to my cars a/c system after the condenser is replaced.2002 Chrysler Town & Country

Hello. When replacing a part like the condenser it is a good idea to add some extra oil with the new refrigerant. Most refrigerants do have some oil in them which should be enough. The majority of the oil in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com