Lincoln Navigator Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(270)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(270)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Lincoln Navigator Control Arm Assembly Replacement is $215 with $75 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Lincoln NavigatorV6-3.5L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$665.96Shop/Dealer Price$790.27 - $1153.48
2009 Lincoln NavigatorV8-5.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$598.41Shop/Dealer Price$714.72 - $1056.45
2001 Lincoln NavigatorV8-5.4LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$442.81Shop/Dealer Price$520.27 - $745.32
2003 Lincoln NavigatorV8-5.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1577.53Shop/Dealer Price$1938.67 - $3014.76
2015 Lincoln NavigatorV6-3.5L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$553.90Shop/Dealer Price$624.90 - $809.06
2000 Lincoln NavigatorV8-5.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$480.65Shop/Dealer Price$567.81 - $821.43
2012 Lincoln NavigatorV8-5.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$598.41Shop/Dealer Price$714.79 - $1056.57
2005 Lincoln NavigatorV8-5.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1577.53Shop/Dealer Price$1938.67 - $3014.76
Show example Lincoln Navigator Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(270)

Rating Summary
252
10
3
0
5
252
10
3
0
5

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Navigator 2001 - Coolant Reservoir - Suisun City, CA
Extremely honest. Determined one of my hoses was still in great shape and reduced my bill. I completely trust him with my cars. Very professional and polite.

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Navigator 2001 - Heater Hoses - Suisun City, CA
Extremely honest. Determined one of my hoses was still in great shape and reduced my bill. I completely trust him with my cars. Very professional and polite.

Daniel

8 years of experience
18 reviews
Daniel
8 years of experience
Navigator 2012 - Fuel Injector - Fort Lauderdale, FL
Very professional, knowledgeable and friendly.

Leo

17 years of experience
80 reviews
Leo
17 years of experience
Navigator 2015 - Brakes, Steering and Suspension Inspection - Greensboro, NC
Very professional, also very friendly. I enjoyed working with my mechanic.. Thank you

Excellent Rating

(270)

Rating Summary
252
10
3
0
5
252
10
3
0
5
Number of Lincoln Navigator services completed
2970+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

What are the Car Pool Rules in Kentucky?
Every Every day, a large number of Kentucky drivers rely on the state’s freeways to get them to work, school, the grocery store, and many other places. And many of these drivers utilize Kentucky’s car pool lanes, which can be...
Understanding Electric Car Batteries
Know how your electric vehicle's battery works to maximize its life and efficiency — and whether replacement is covered by manufacturer warranty.
How to Use Jumper Cables
It's It's disheartening when you settle into the driver's seat ready to go to work or visit friends, turn the key in your ignition, and nothing happens. It is usually a sign that your battery is dead and just needs...

How do I use the navigation system?

If your vehicle is equipped with a navigation system, it will help you find directions where you need to go. Your navigation will appear on the center display. To use the navigation system. Type in the address you need to...

My power steering - 2006 Pontiac Grand Prix

Usually power steering systems have a pressure hose that goes from the pump to the rack and pinion there is a return hose that goes from the rack and pinion to the reservoir and then there is a feed hose...

Car showing various fault codes Ford (Transit?)

Hello - the P1631, if this is for a Ford Transit van as it appears, is most often a byproduct of a poor battery condition, with multiple cranking events before a successful start. I would check first for low starting...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com