Lincoln MKX Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(133)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(133)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Lincoln MKX Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Lincoln MKXV6-2.7L TurboService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 Lincoln MKXV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2013 Lincoln MKXV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2008 Lincoln MKXV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2017 Lincoln MKXV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2010 Lincoln MKXV6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2016 Lincoln MKXV6-2.7L TurboService typeWindows InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2015 Lincoln MKXV6-3.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Lincoln MKX Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(133)

Rating Summary
125
4
2
1
1
125
4
2
1
1

Stacy

24 years of experience
366 reviews
Stacy
24 years of experience
Lincoln MKX V6-3.5L - Tie Rod End Replacement (Front Left Inner, Front Right Inner, Front Left Outer, Front Right Outer) - Jonesboro, Georgia
Outstanding mechanic

Brian

23 years of experience
661 reviews
Brian
23 years of experience
Lincoln MKX V6-3.5L - Car Battery Replacement - Jacksonville, Florida
Great

Sha

43 years of experience
39 reviews
Sha
43 years of experience
Lincoln MKX V6-3.5L - Cooling/Radiator Fan Motor - Riverdale, Georgia

Johari

27 years of experience
21 reviews
Johari
27 years of experience
Lincoln MKX V6-3.5L - Squealing noise from brakes - Chicago, Illinois
Another good job. Quickly diagnosed and fixed the problem.

Excellent Rating

(133)

Rating Summary
125
4
2
1
1
125
4
2
1
1
Number of Lincoln MKX services completed
1463+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

The Guide to Legal Car Modifications in North Carolina
ARENA Creative / Shutterstock.com North Carolina has a variety of laws in place that govern modified vehicles. If you live in the state or are planning on moving to it, you need to make sure your modified...
The Traveler’s Guide to Driving in Brazil
Brazil Brazil is becoming a very popular country for many tourists. Whether they want to spend time on the beach, or they want to visit the rainforest, there is plenty to do and a veritable treasure trove of attractions to...
P0970 OBD-II Trouble Code: Pressure Control Solenoid “C” Control Circuit Low
P0970 means there is a discrepancy between the desired hydraulic pressure and the actual hydraulic pressure due to faulty solenoids.

central locking system, locks, actuator, motor assembly, door

The ones that aren't working, you've got to push or pull. The actuator (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-door-lock-actuator) on those doors probably went out. It is a little motor assembly. When you find out how much those stupid little electronic motor assemblies cost, you'll...

Is the Engine "interference" or "non-interference"?

Hey there. In the context of engines, interference timing refers to the use of a timing belt rather than a chain (https://www.yourmechanic.com/article/what-is-the-difference-between-a-timing-belt-and-a-timing-chain), such that when this belt breaks, the camshaft and other internal parts (like valves) will cause major damage...

Does an air intake manifold have parts that can go out to affect the smog an motor?

Code P0300 relates to a misfire of some kind, which can be caused by any number of things. Engine misfires (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) can be caused by many different problems and are generally caused by either a spark or fuel issue or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com