Lincoln MKX Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(118)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(118)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Lincoln MKX Throttle Body Replacement is $280 with $140 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Lincoln MKXV6-3.7LService typeThrottle Body ReplacementEstimate$451.30Shop/Dealer Price$531.68 - $758.63
2007 Lincoln MKXV6-3.5LService typeThrottle Body ReplacementEstimate$726.49Shop/Dealer Price$874.82 - $1312.61
2012 Lincoln MKXV6-3.7LService typeThrottle Body ReplacementEstimate$442.29Shop/Dealer Price$519.62 - $744.28
2008 Lincoln MKXV6-3.5LService typeThrottle Body ReplacementEstimate$726.49Shop/Dealer Price$874.87 - $1312.68
2015 Lincoln MKXV6-3.7LService typeThrottle Body ReplacementEstimate$442.29Shop/Dealer Price$522.19 - $748.79
2009 Lincoln MKXV6-3.5LService typeThrottle Body ReplacementEstimate$726.49Shop/Dealer Price$875.11 - $1313.11
2010 Lincoln MKXV6-3.5LService typeThrottle Body ReplacementEstimate$726.49Shop/Dealer Price$874.89 - $1312.73
2016 Lincoln MKXV6-3.7LService typeThrottle Body ReplacementEstimate$425.11Shop/Dealer Price$498.14 - $709.92
Show example Lincoln MKX Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(118)

Rating Summary
110
4
2
1
1
110
4
2
1
1

Mike

25 years of experience
79 reviews
Mike
25 years of experience
MKX 2015 - Spark Plugs - Livonia, MI
Replaced Spark plugs on Lincoln MKX. Everything is good so far!

Corey

15 years of experience
184 reviews
Corey
15 years of experience
MKX 2011 - Pre-purchase Car Inspection - Concord, NC
Corey was professional, and offered helpful information. This is my second experience with your comoany, and will use it again. Thank you

Duane

20 years of experience
545 reviews
Duane
20 years of experience
MKX 2007 - Battery Terminal Ends - Oceanside, CA
Duane was so professional, very honest, and did great work on my Lincoln. I will be sure to use him in the future if necessary and refer him to everyone. Thanks again Duane!

John

23 years of experience
879 reviews
John
23 years of experience
MKX 2013 - Clunking or knocking noise from wheels - Pearland, TX
John has solved the issue that the car service center had not fixed several times. It took only 30 minutes. He is really professional. Thanks, John.

Excellent Rating

(118)

Rating Summary
110
4
2
1
1
110
4
2
1
1
Number of Lincoln MKX services completed
1298+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

Indiana Parking Laws: Understanding the Basics
When When driving on the roads of Indiana, abiding by the laws and regulations of the road is par for the course. However, drivers also need to make sure they abide by the laws when they are finding places to...
How Long Does a Power Seat Switch Last?
While While many cars still have manual seat adjustments that work mechanically (you pull up on the bar in front of the seat, and then slide the seat forward or back), power seats are becoming more and more common these...
How Long Does an AC Pressure Switch Last?
Your Your car’s AC system uses refrigerant to help keep you cool and comfortable in hot weather. When the refrigerant is under low pressure, it takes the form of a gas, and when it is under high pressure, it transforms...

Blower or heat and air conditioner are not working? Relay fuse

The blower fuse is a 40 amp fuse located in the engine compartment's fuse box. The blower blower is controlled by the blower controller/resistor next to blower in the housing. The A/C control head controls the resistor controller for the...

Issues changing gears 2002 Honda S2000

Hello - I would say you either have a problem with your clutch hydraulics (https://www.yourmechanic.com/article/how-a-hydraulic-clutch-system-works) (most likely the clutch master cylinder), or the pilot bearing is starting to fail. A pilot bearing that is seizing up will act like a...

If tdc is on exhaust stroke will it have 10psi on cylinder 1

Most engines will need at least a minimum of 100 psi per cylinder in order to run. In addition, for the motor to run efficiently, this also requires a variance of less than 10% from cylinder to cylinder on this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com