Lexus SC300 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Lexus SC300 Front Crankshaft Seal Replacement is $686 with $294 for parts and $392 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1224.84Shop/Dealer Price$1440.19 - $2046.55
2000 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1092.79Shop/Dealer Price$1252.80 - $1708.30
1996 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1287.21Shop/Dealer Price$1495.98 - $2097.40
1995 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1287.21Shop/Dealer Price$1495.97 - $2097.39
1994 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1199.61Shop/Dealer Price$1413.64 - $2019.02
1997 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1287.21Shop/Dealer Price$1496.81 - $2098.85
1993 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1199.61Shop/Dealer Price$1406.50 - $2006.52
1999 Lexus SC300L6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1084.67Shop/Dealer Price$1242.79 - $1692.31
Show example Lexus SC300 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(33)

Rating Summary
32
0
0
1
0
32
0
0
1
0

Phillip

20 years of experience
310 reviews
Phillip
20 years of experience
Lexus SC300 L6-3.0L - Starter - Sacramento, California
Clean, fast, efficient & respectful.. I would recommend Phillip..

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Lexus SC300 L6-3.0L - Oil Change - Brentwood, California
Everything was perfect ~ Will definitely call your company again!!!!

Enrique

23 years of experience
44 reviews
Enrique
23 years of experience
Lexus SC300 L6-3.0L - Fuel Filter - Pompano Beach, Florida
Excellent job. On time, pleasant, and good knowledge of what was required. Got my car back on the road.

Peter

28 years of experience
86 reviews
Peter
28 years of experience
Lexus SC300 L6-3.0L - Other Inspections - Selma, California
Very helpful and knowledgeable!

Excellent Rating

(33)

Rating Summary
32
0
0
1
0
32
0
0
1
0
Number of Lexus SC300 services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

The Dangers of Aggressive Driving
Aggressive Aggressive driving, also commonly referred to as road rage, involves behavior that is motivated by anger while driving. The term refers to dangerous driving with a disregard for safety and courtesy. Aggressive driving includes behaviors such as tailgaiting, speeding,...
What Are the Benefits of an Aftermarket Exhaust System?
All All cars must have an exhaust system in order to vent gases from the engine. However, your car’s stock exhaust system probably isn’t all it could be. Automakers are required to make a number of trade-offs to ensure that...
Disabled Driver Laws and Permits in Vermont
In In the State of Vermont, the Department of Motor Vehicles (DMV) provides special license plates and placards for people who have disabilities. If you have a disability that qualifies you for a plate or placard, you can apply for...

weird noise with cold air intake and idle

This is a common symptom of the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) needing to be upgraded due to the increased air intake. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) operates based upon predetermined stock tuning in the ECM. When the air...

Car shakes when I apply brakes doing 45mph or more and even when I don't apply brakes around 60 mph 2005 Chevy Equinox

Hello - you likely have multiple problems here: one of which exaggerates the others. Given your mileage, your front struts are likely worn (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-strut-assembly). This is important because the tire imbalance you feel at 60 mph (without braking), and the...

Chirping noise when accelerating...usually right when you accelerate from a stop. 2011 grand Cherokee limited.

This noise is sometimes due to faults with either the serpentine drive belt and/or any of the belt driven accessories or pulleys. If any of the latter are the cause, such can be conclusively determined by simply disconnecting the drive...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com