Lexus LX570 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Lexus LX570 Power Steering Pressure Hose Replacement is $767 with $543 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1334.86Shop/Dealer Price$1616.66 - $2439.36
2009 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1320.44Shop/Dealer Price$1597.29 - $2416.29
2016 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1508.18Shop/Dealer Price$1832.04 - $2791.89
2013 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1320.44Shop/Dealer Price$1597.36 - $2416.41
2010 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1320.44Shop/Dealer Price$1601.49 - $2423.63
2017 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1508.18Shop/Dealer Price$1830.03 - $2788.38
2008 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1320.44Shop/Dealer Price$1597.41 - $2416.48
2015 Lexus LX570V8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$1320.44Shop/Dealer Price$1597.36 - $2416.41
Show example Lexus LX570 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0

Jordan

9 years of experience
144 reviews
Jordan
9 years of experience
Lexus LX570 V8-5.7L - Oil Change - Kissimmee, Florida
Excellent job

Timothy

49 years of experience
201 reviews
Timothy
49 years of experience
Lexus LX570 V8-5.7L - Pre-purchase Car Inspection - Carrollton, Texas
He was there at the dealership before the time scheduled. He had thorough reports showing all the facets of the Car that was tested. Engines were checked and every pertinent detail summarized in a crisp report that I followed up with for more information. He was very responsive to the explanations for the slight things he found on my Lexus LX 570 and gave me insight as to what to worry about, like he was truly an eye for me out there in Dallas

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Lexus LX570 V8-5.7L - Oil Change - Sammamish, Washington
Above and beyond.

Chris

16 years of experience
312 reviews
Chris
16 years of experience
Lexus LX570 V8-5.7L - Brake Pads Replacement (Front) - La Jolla, California
Chris was on time and performed the required work in a reasonable time. Kept the parts that were replaced as evidence. Payment was a breeze with a signature on a mobile device and all was done

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Lexus LX570 services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

P2010 OBD-II Trouble Code: Intake Manifold Runner Control Circuit High Bank 1
P2010 P2010 trouble code definition P2010 is a generic OBD2 trouble code that indicates a fault within the intake manifold runner control circuit. This code is similar to P2005, P2006, P2007, P2008, P2009, P2013 and P2015. What the P2010 code...
P0913 OBD-II Trouble Code: Gate Select Actuator Circuit High
P0913 means the transmission gate select actuator circuit is malfunctioning, most likely a result of faulty wiring.
P2086 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 2
What What the P2086 code means? P2086 is an OBD-II generic code for the exhaust gas temperature sensor circuit signal is out of range for bank 2 Sensor 2 to the engine control module (ECM). This means the sensor signal...

My cars auto theft was triggered and now my battery is dead.

Hi there. You can get a jump-start to start the engine, but I recommend either charging your battery or replacing it. Trying to jump-start your vehicle with a completely dead battery may damage the computer and other components. This also...

Why is my engine light on in my 2008 VW Jetta

Hi there. If the check engine light came on for the gas cap and then for the fuel pump, either there is an electrical issue around the fuel tank causing the fuel pump to have a intermittent issue, or the...

I need a thermostat replaced do I need to replace the water pump as well

Typically, the scenario is the reverse: that is the water pump fails and the question is should the thermostat be replaced at the same time that the water pump is replaced. The answer is absolutely because the thermostat itself can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com