Lexus IS300 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(124)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(124)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Lexus IS300 Power Steering Pressure Hose Replacement is $426 with $230 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Lexus IS300L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$677.26Shop/Dealer Price$801.15 - $1152.96
2003 Lexus IS300L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$664.65Shop/Dealer Price$784.20 - $1132.77
2001 Lexus IS300L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$664.65Shop/Dealer Price$784.27 - $1132.88
2005 Lexus IS300L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$664.65Shop/Dealer Price$784.26 - $1132.87
2004 Lexus IS300L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$664.65Shop/Dealer Price$787.87 - $1139.19
Show example Lexus IS300 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(124)

Rating Summary
118
3
1
2
0
118
3
1
2
0

Claud

9 years of experience
640 reviews
Claud
9 years of experience
Lexus IS300 L6-3.0L - Steering Rack/Gearbox - Detroit, Michigan
After rescheduling twice due to weather, Claud got the job done.

Ira

49 years of experience
283 reviews
Ira
49 years of experience
Lexus IS300 L6-3.0L - Windows - Tampa, Florida
On time....polite..... knowledgeable.....what more could one ask for?

David

26 years of experience
180 reviews
David
26 years of experience
Lexus IS300 V6-3.5L - Brake Pads Replacement (Front) - Groveland, Florida
Great job!

Keith

19 years of experience
406 reviews
Keith
19 years of experience
Lexus IS300 L6-3.0L - Alternator - Winter Haven, Florida
Prompt, professional, and great service!

Excellent Rating

(124)

Rating Summary
118
3
1
2
0
118
3
1
2
0
Number of Lexus IS300 services completed
1364+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Tighten a Brake Caliper Bolt in 5 Steps
Avoid brake failure by knowing how to tighten your brake caliper bolts.
4 Essential Things to Know About Your Car’s Check Engine Light
The Check Engine Light turns on when there's an engine problem. A bad oxygen sensor or failed spark plug are common causes for the Check Engine Light.
How to Buy Good Quality Power Steering Fluid
Keeping Keeping your vehicle’s power steering fluid topped off and flushed regularly and replaced is one of the first steps towards assuring that your steering stays in tip top shape and you are driving safely. Your steering system utilizes a...

Car slips out of gear

Hello! I suggest having the transmission module tested by a technician. There are certain specifications of resistance and voltages a module must have to properly work. Both resistance and voltage can be tested with a multimeter. If it fails testing...

Car has power reduction and grinding noise

Hello. From the symptoms you are describing it would appear that the vehicle may be experiencing some sort of mechanical issue with the engine or transmission. The issues may or may not be related, however that should not be an...

Hello i have a 1994mitsubishi gto na/auto & after approx 15 mins warm up it loses all its gears & makes a "buzzing" noise from the autobox in all gears except neutral&park,but when its cold it all works great ?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com