Lexus GX460 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(37)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(37)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Lexus GX460 Mass Airflow Sensor Replacement is $226 with $131 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$376.99Shop/Dealer Price$459.99 - $669.62
2013 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$356.99Shop/Dealer Price$440.02 - $649.67
2015 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$356.99Shop/Dealer Price$440.02 - $649.67
2017 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$457.69Shop/Dealer Price$558.36 - $837.88
2016 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$457.69Shop/Dealer Price$565.92 - $851.12
2010 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$356.99Shop/Dealer Price$440.02 - $649.67
2012 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$361.99Shop/Dealer Price$444.78 - $654.25
2011 Lexus GX460V8-4.6LService typeMass Airflow Sensor ReplacementEstimate$361.99Shop/Dealer Price$445.44 - $655.39
Show example Lexus GX460 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(37)

Rating Summary
36
0
0
0
1
36
0
0
0
1

Scott

36 years of experience
899 reviews
Scott
36 years of experience
Lexus GX460 V8-4.6L - Brake Pads Replacement (Rear) - Gilbert, Arizona
He was so nice! He did a great job! Great experience! Thank you Scott.

Ronald

41 years of experience
307 reviews
Ronald
41 years of experience
Lexus GX460 V8-4.6L - Differential Fluid Service Replacement (Front, Rear) - Conroe, Texas
Great work and was very clean.

Frederick

16 years of experience
54 reviews
Frederick
16 years of experience
Lexus GX460 V8-4.6L - Brake Pads Replacement (Front, Rear) - Pittsburg, California
Service provided by Frederick Tizon (Your Mechanic) was excellent! He was truly knowledgeable, was able to fixed the brakes promptly, diagnosed other related parts, and honestly adjusted cost of repair. I highly recommend Frederick Tizon for quality of work, professionalism, and industry knowhow. I'm so glad that "Your Mechanic" is around to provide the services of expert mechanics!

Johnathan

7 years of experience
108 reviews
Johnathan
7 years of experience
Lexus GX460 V8-4.6L - Oil Change - High Ridge, Missouri
Very friendly, knowledgeable and professional

Excellent Rating

(37)

Rating Summary
36
0
0
0
1
36
0
0
0
1
Number of Lexus GX460 services completed
407+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Camshaft Position Sensor
The The camshaft position sensor is a vital part of your engine’s ability to function properly. It detects the position, speed, acceleration and deceleration of the camshaft, which regulates the injection of fuel into the engine. In order to make...
How Long Does an Ambient Temperature Sensor (Switch) Last?
In In many late-model vehicles, the need to manually adjust heat and air conditioning has been eliminated. You can actually set your car’s computer to regulate the cooling and heating process based on the temperature at which you feel most...
How Long Does a Battery Temperature Sensor Last?
Most Most people fail to realize just how sensitive the charging system on their car is. If all of the components of your charging system are not working properly, then it will be nearly impossible to crank and run the...

Overheating after replacing water pump, thermostat and coolant temp. Sensor

Hello. That hole in the water pump is there to let you know when the bearing in the water pump is failing. It starts leaking when the bearing is going out so that it will be replaced prior to a...

Changed DPF and still getting warning lights. Can't work as taxi driver, please help (Lexus 220D)

Hello. If the trouble codes are indicating that the dpfe is blocked, then there may be an obstruction in the system, or perhaps an electrical issue. The dpfe sensor functions using vacuum and exhaust gases. If there is an obstruction...

I just want to know if my car has a crankshaft position sensor - 2003 Nissan Xterra

Hi there - yes, your V6 Xterra has a crankshaft position sensor (CPS) (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor). It is located behind the driver-side cylinder head, on the top of the bellhousing (the aluminum casting that connects the engine and transmission). For assistance with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com