Lexus GS460 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(44)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(44)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Lexus GS460 Power Steering Pressure Hose Replacement is $418 with $222 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Lexus GS460V8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$661.88Shop/Dealer Price$781.92 - $1122.20
2009 Lexus GS460V8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$649.27Shop/Dealer Price$764.98 - $1102.01
2010 Lexus GS460V8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$649.27Shop/Dealer Price$765.04 - $1102.12
2008 Lexus GS460V8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$649.27Shop/Dealer Price$765.04 - $1102.11
Show example Lexus GS460 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(44)

Rating Summary
40
1
0
0
3
40
1
0
0
3

Justin

6 years of experience
92 reviews
Justin
6 years of experience
Lexus GS460 V8-4.6L - Window is not working - Gilbert, Arizona
Very helpful. And direct to the task!!!!

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Lexus RX330 V6-3.3L - Power Steering Pressure Hose - Hermosa Beach, California
Kenneth is come through again for me on my Lexus RX330. I have 200k miles on it and Kenneth keeps my vehicle running strong.

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Lexus ES330 V6-3.3L - Power Steering Pressure Hose - Austin, Texas
He was on time and finished in the estimated time. A good deal!

Joel

12 years of experience
177 reviews
Joel
12 years of experience
Lexus ES350 V6-3.5L - Power Steering Pressure Hose - Little Elm, Texas
He was Awesome and enjoy working with him very hard worker and Dedication to his performance.

Excellent Rating

(44)

Rating Summary
40
1
0
0
3
40
1
0
0
3
Number of Lexus Power Steering Pressure Hose Replacement services completed
484+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Fuel Filler Neck
Common signs include a fuel smell coming from the car, the Check Engine Light coming on, and fuel leaks.
Is it Safe to Drive With a Radiator Leak?
The radiator helps to keep your engine cool. If your radiator is leaking, coolant will be lost and the engine will have the potential...
Symptoms of a Bad or Failing Differential Output Seal
Common signs include whining sounds and oil leaks coming from the differential.

What Are the Common Issues After a Timing Belt Snaps?

The most common issue that occurs after a timing belt snaps is that your engine won't start. Another common issue, depending on whether you have a freewheeling engine design or non-freewheeling engine design, is a piston making contact with a...

Key fob won't unlock or lock doors

I believe you should have a technician use a capable scan tool to test the immobilizer and security system of the vehicle. There are likely codes present that will lead you directly to the issue. Also have them test the...

Where is starter on 2006 lexus is250

The starter is usually located right where the engine and the transmission bolt up together. Starters are usually accessable from the bottom side however some vehicles require it to be removed from the top. It is unlikely that your vehicle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com