Lexus GS430 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(39)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(39)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Lexus GS430 Front Crankshaft Seal Replacement is $1001 with $427 for parts and $574 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Lexus GS430V8-4.3LService typeFront Crankshaft Seal ReplacementEstimate$1493.58Shop/Dealer Price$1733.93 - $2396.86
2001 Lexus GS430V8-4.3LService typeFront Crankshaft Seal ReplacementEstimate$1456.64Shop/Dealer Price$1684.32 - $2337.74
2007 Lexus GS430V8-4.3LService typeFront Crankshaft Seal ReplacementEstimate$1467.70Shop/Dealer Price$1695.00 - $2346.15
2006 Lexus GS430V8-4.3LService typeFront Crankshaft Seal ReplacementEstimate$1467.70Shop/Dealer Price$1694.99 - $2346.13
2002 Lexus GS430V8-4.3LService typeFront Crankshaft Seal ReplacementEstimate$1456.64Shop/Dealer Price$1695.06 - $2356.55
2005 Lexus GS430V8-4.3LService typeFront Crankshaft Seal ReplacementEstimate$1456.64Shop/Dealer Price$1685.50 - $2339.81
2003 Lexus GS430V8-4.3LService typeFront Crankshaft Seal ReplacementEstimate$1456.64Shop/Dealer Price$1684.60 - $2338.24
Show example Lexus GS430 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(39)

Rating Summary
37
2
0
0
0
37
2
0
0
0

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Lexus GS430 V8-4.3L - Control Arm Assembly Replacement (Front Upper Right) - Newark, California
Early, honest, and friendly!!!

Steven

22 years of experience
200 reviews
Steven
22 years of experience
Lexus GS430 V8-4.3L - Alternator - Irving, Texas
I didn't get a chance to meet him but he was pleasant and professional to speak to. My husband drove the car to test it and he said it was great, plus he fixed it in ess time then expected. Who can beat that? Thank Steven I will be requesting only you from now on!

Amir

4 years of experience
56 reviews
Amir
4 years of experience
Lexus GS430 V8-4.3L - Door Mirror Replacement (Passenger Side) - Plano, Texas
He was awesome. First time using this service and working with him. Straightforward and professional. I would use him again and he is very knowledgeable on cars.

Daniel

10 years of experience
52 reviews
Daniel
10 years of experience
Lexus GS430 V8-4.3L - Oil Change - Deerfield Beach, Florida
Great! Many thanks

Excellent Rating

(39)

Rating Summary
37
2
0
0
0
37
2
0
0
0
Number of Lexus GS430 services completed
429+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're in a Wheelchair
Being Being in a wheelchair means you have a very specific list of demands, and requests for your vehicle. The main focus is of course how you will get in and out of the vehicle. There are some other aspects...
5 Cases Where You Should Call a Tow Truck
In situations where a mechanic cannot get to you, or cannot drive your car to a shop, calling a tow truck is the best option.
How to Replace an AC Accumulator
The accumulator in the air conditioning system is faulty if there is rattling inside of it or there is a moldy smell emitting from the AC system.

Car loses power, sputters, shakes, jerks, stalls and the check engine light flashes and I cant drive over 15 like 20 mph

That type of very rough running, sputtering, no power is commonly caused by problems with the ignition system. The fuel system also needs to be checked to eliminate a fuel control problem as the source of this issue. Cam timing...

I was stopped on the freeway, started to go about 5 mph, the car jerked and stop without warning like the wheels locked up.

Hi, thanks for writing in. I'd be happy to try to help. It is hard to definitively diagnose what the issue is. At first it seems like a transmission issue. Automatic transmissions are rather complicated and can do strange things...

I'm replacing the wiper motor/pulse board assembly.

Hello - yes, it is possible that you have locked down a pivot point or other piece of the linkage that is meant to turn or rotate. Try loosening pivot point nuts/bolts, and retry the motor. Unfortunately, this is one...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com