Lexus ES300h Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Lexus ES300h Car Battery Replacement is $440 with $300 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2023 Lexus ES300hL4-2.5L HybridService typeCar Battery ReplacementEstimate$755.00Shop/Dealer Price$908.60 - $1361.30
2022 Lexus ES300hL4-2.5L HybridService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.82 - $1349.20
Show example Lexus ES300h Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(26)

Rating Summary
23
2
0
0
1
23
2
0
0
1

Adrian

13 years of experience
39 reviews
Adrian
13 years of experience
Lexus ES300h L4-2.5L Hybrid - Oil Change - Milpitas, California
He is good.

Bryan

23 years of experience
45 reviews
Bryan
23 years of experience
Lexus ES300h L4-2.5L Hybrid - Pre-purchase Car Inspection - Seffner, Florida
Bryan arrived on time and did a thorough inspection.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Lexus ES300h L4-2.5L Hybrid - Pre-purchase Car Inspection - Temecula, California
Amazing guy.... called and gave me what felt to be his honest and straightforward opinion on my vehicle.... def will book him again in the future for work

Efrain

21 years of experience
101 reviews
Efrain
21 years of experience
Lexus ES300h L4-2.5L Hybrid - 40,000 Miles Maintenance Service - Silver Spring, Maryland
Professional. Nuff said

Excellent Rating

(26)

Rating Summary
23
2
0
0
1
23
2
0
0
1
Number of Lexus ES300h services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Repair Dashboard Lights
Vehicle dashboard (https://www.yourmechanic.com/article/5-essential-things-to-know-about-your-car-s-dashboard) lights assist the driver in monitoring the various gauges of their car. These important lights include the...
Are Colored Headlights Safe and Legal?
Most Most vehicles have standard headlights that emit yellowish light. However, there are bulbs on the market that are different colors. They’re marketed as “blue” or “super blue,” and there is a great deal of uncertainty around their safety and...
Kia Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Kia vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...

I heard a ticking sound when I accelerate and my engine light blinks for few seconds the just stays on. What could be the cause of

Your vehicle may be experiencing engine misfires. Multiple misfires can cause the noise you are describing and if the misfires happen long enough, the check engine light will start to blink to warn of catalyst damage. Typical causes are the...

Heater blowing cool air 2014 Jeep Wrangler

You need to make sure the engine is getting up to operating temperature in order to get full heat out of the heater core your engine needs to be up to operating temperature. If the engine is not then your...

I have a 2005 Toyota Sienna xle that stalled while driving. For a few days prior I heard a squealing sound coming from the engine

Hi there. The OBD-II trouble code you listed (https://www.yourmechanic.com/article/p0346-obd-ii-trouble-code-camshaft-position-sensor-a-circuit-range-performance-bank-2-by-valerie-johnston), P0346 is an indication of an issue with the crankshaft position sensor. When this component fails, it will cause the ignition timing system to operate incorrectly, and can be the source...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com