Lexus ES250 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Lexus ES250 Control Arm Assembly Replacement is $308 with $168 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Lexus ES250V6-2.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$831.90Shop/Dealer Price$971.73 - $1361.45
1990 Lexus ES250V6-2.5LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$812.98Shop/Dealer Price$946.32 - $1331.17
1991 Lexus ES250V6-2.5LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$652.39Shop/Dealer Price$782.24 - $1164.48
1990 Lexus ES250V6-2.5LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$652.39Shop/Dealer Price$782.24 - $1164.48
1991 Lexus ES250V6-2.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$652.39Shop/Dealer Price$784.82 - $1168.99
1990 Lexus ES250V6-2.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$652.39Shop/Dealer Price$782.49 - $1164.91
1990 Lexus ES250V6-2.5LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$652.39Shop/Dealer Price$782.27 - $1164.53
1990 Lexus ES250V6-2.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$652.39Shop/Dealer Price$782.24 - $1164.48
Show example Lexus ES250 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Michael

17 years of experience
606 reviews
Michael
17 years of experience
Lexus ES250 V6-2.5L - Tune-up - Marietta, Georgia
Michael is great!! Love how honest, quick and efficient he is.

Daniel

12 years of experience
54 reviews
Daniel
12 years of experience
Lexus ES250 V6-2.5L - Brakes, Steering and Suspension Inspection - Sacramento, California
Excellent Service, Very Knowledgeable about His Work

Sivi

18 years of experience
21 reviews
Sivi
18 years of experience
Lexus ES250 L4-2.5L - Pre-purchase Car Inspection - Keller, Texas
Great. Thoroughly done pre buying inspection

Michael

17 years of experience
606 reviews
Michael
17 years of experience
Lexus ES250 V6-2.5L - Oil Change - Marietta, Georgia
Michael was Excellent! He was honest with me, on time with appointment, and very professional. It turned out that I didn’t need a starter after all once he did my inspection! The battery cables were actually just too loose. He changed my oil and filter. He even killed a wasp nest that was in the door jam of the car for me with his brake spray. I will definitely recommend and will use Michael again!!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Lexus ES250 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

Is It Safe to Drive While Taking Antihypertensives?
Do Do you have high blood pressure? If so, you may have had antihypertensive medication prescribed to you by your doctor. As is the case with many medications, there can be side effects, some of which may affect your ability...
10 Best Stores to Buy Auto Parts in New York, New York
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in New York is Advance Auto Parts.
P2105 OBD-II Trouble Code: Throttle Actuator Control System - Forced Engine Shutdown
P2105 P2105 trouble code definition Throttle Actuator Control System (TAC) - Forced Engine Shutdown What the P2105 code means This code is set when the PCM (Powertrain Control Module) has failed or the PCM has detected one or more problems...

Water leak in the trunk of my car

It could be that the water is leaking in past the trunk weather stripping or possibly the drain in the bottom of the trunk is plugged. If you are brave you can get inside the trunk with a flashlight, close...

Is it safe to switch from 5/30 weight formula Shell oil to a synthetic oil to store for the winter?

Hi, thanks for writing in. You should not need to change the oil from the 5/30 you have in order to store the car for the winter. I would recommend filling the car up with fuel and having the tire...

I changed my oil pan gasket and now there is a knocking at the back of the oil pan, what could it be

Hello, thank you for writing in. The first thing to do is make sure your oil level and type are correct. If you suspect that there may be a mechanical issue with the components towards the bottom of the engine,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com