Land Rover LR4 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Land Rover LR4 Control Arm Assembly Replacement is $181 with $86 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Land Rover LR4V6-3.0L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$494.79Shop/Dealer Price$607.24 - $905.22
2013 Land Rover LR4V8-5.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$343.32Shop/Dealer Price$417.97 - $570.89
2013 Land Rover LR4V8-5.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$466.57Shop/Dealer Price$577.00 - $868.83
2015 Land Rover LR4V6-3.0L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$466.43Shop/Dealer Price$576.78 - $868.48
2016 Land Rover LR4V6-3.0L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$468.01Shop/Dealer Price$578.82 - $871.76
2013 Land Rover LR4V8-5.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$474.79Shop/Dealer Price$587.27 - $885.27
2014 Land Rover LR4V6-3.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$292.33Shop/Dealer Price$356.16 - $500.98
2011 Land Rover LR4V8-5.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$479.79Shop/Dealer Price$592.69 - $890.99
Show example Land Rover LR4 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Land Rover LR4 Control Arm Assembly Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

What Causes Leakage in the Shock Absorbers?
Every car, truck, and utility vehicle sold today has at least one shock absorber (informally known as a shock) for each of its...
P2410 OBD-II Trouble Code: Fuel Cap Sensor/Switch Circuit Low
P2410 means there is a fault with the fuel cap sensor switch, possibly due to a bad sensor, improperly installed cap, or electrical defects.
How to Replace an Ignition Coil
Your spark plugs work with the ignition coil to receive signals from your vehicle’s computer. A bad coil can cause driveability issues like stalling.

serpintine belt and tensioner pulley replacement.

Hello. Thanks for writing in. Obviously you will want to clear some room to have access to the tensioner. This is easiest done by removing the radiator. Once you have the old tensioner removed, you simply reverse the process to...

Vibrates in reverse

Hi there. Without inspecting the vehicle personally, we could only guess at what might be causing this type of vibration or noise. In some cases, the vibration is caused by the rear gear or driveshaft as the vehicle is put...

Hello. I have a 2013 Jeep Grand Cherokee. I bought it in 2016/17. The vehicle loses power while driving, but the engine keeps running. The throttle body icon on the dashboard immediately turns on. When I pull over and shut off the car, when I try to restart it the starter trays to turn over. I have to sit on the side of the road for a couple of minutes to 20 minutes and then it will start up every time like nothing happens. When it loses power sometimes there is a "clunk - thud" sound when I accelerate like to get up and go. Sometimes it just does it while I am not giving it any gas, just cruzing. It can do it 3 times in a\*\*\*\*\*or it wont do it for a few weeks with daily driving. We had the throttle body changed and we are you to change the [fuel pump](/topics-fuel-pump-jeep/)....just ordered one

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com