Land Rover LR2 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(120)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(120)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Land Rover LR2 Power Steering Pump Replacement is $666 with $414 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Land Rover LR2L6-3.2LService typePower Steering Pump ReplacementEstimate$1916.80Shop/Dealer Price$2321.37 - $3502.46
2009 Land Rover LR2L6-3.2LService typePower Steering Pump ReplacementEstimate$1896.08Shop/Dealer Price$2293.53 - $3469.29
2014 Land Rover LR2L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1091.14Shop/Dealer Price$1304.09 - $1929.75
2010 Land Rover LR2L6-3.2LService typePower Steering Pump ReplacementEstimate$1896.08Shop/Dealer Price$2293.63 - $3469.46
2012 Land Rover LR2L6-3.2LService typePower Steering Pump ReplacementEstimate$1896.08Shop/Dealer Price$2299.56 - $3479.84
2015 Land Rover LR2L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1091.14Shop/Dealer Price$1304.53 - $1930.52
2008 Land Rover LR2L6-3.2LService typePower Steering Pump ReplacementEstimate$1896.08Shop/Dealer Price$2293.69 - $3469.57
2013 Land Rover LR2L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1091.14Shop/Dealer Price$1304.08 - $1929.74
Show example Land Rover LR2 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(120)

Rating Summary
112
8
0
0
0
112
8
0
0
0

Steve

16 years of experience
187 reviews
Steve
16 years of experience
Land Rover LR2 L4-2.0L Turbo - Power Steering Pump Replacement - West Orange, New Jersey
Very professional and friendly! Provided better service than dealership.

Sami

22 years of experience
69 reviews
Sami
22 years of experience
Land Rover LR2 L6-3.2L - Brake Pads Replacement (Front) - Arlington, Virginia
Sami arrived on time and performed the brake job quickly and completely. This was my first experience with yourmechanic and I will be using the service again.

Chris

17 years of experience
419 reviews
Chris
17 years of experience
Land Rover LR2 L6-3.2L - Brake Rotor/Disc Replacement (Rear) - South San Francisco, California
Chris showed on time and completed the rear brake job very quickly.

Khoa

21 years of experience
402 reviews
Khoa
21 years of experience
Land Rover LR2 L6-3.2L - Coolant is leaking - San Jose, California
Khoa was on time and took no time finding my leaking problem

Excellent Rating

(120)

Rating Summary
112
8
0
0
0
112
8
0
0
0
Number of Land Rover LR2 services completed
1320+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
600+
experts on our platform

Recent articles & questions

P0873 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch C Circuit High
P0873 means the transmission fluid pressure level is abnormal due to Dirty, contaminated or burnt transmission fluid, or a faulty transmission system.
Kansas Parking Laws: Understanding the Basics
Kansas Kansas drivers are responsible for parking properly and abiding by the laws. They also need to ensure that their vehicle does not become a hazard when it is parked. There are a number of laws in the state that...
How to Put Flames on Your Car
Flames Flames on the side of a car are a throwback to the days of the hot rod, and many people enjoy decorating their cars with this iconic imagery. Painting flames on a vehicle is easy when you use the...

2016 f150 supercab. Low rpm vibration.

The low rpm vibration may be caused by an engine mount failure or poor fueling from a weak fuel pump. Being a 2016, your concern may still be under warranty so you should take the vehicle to your local dealer...

Coolant, cap, hoses replaced. When temp reach middle AC don't work properly then temp goes down.

Hi Thomas. Thanks for contacting us today. Unfortunately, without knowing what year, make and model of vehicle you have, it's hard for us to tell you what could possibly be causing your overheating issues. Each car had different components that...

oil leak

Claimed by Jeff Engstrom

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com