Land Rover Discovery Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(114)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(114)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Land Rover Discovery Car Thermostat Replacement is $169 with $74 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Land Rover DiscoveryV6-3.0L TurboService typeCar Thermostat ReplacementEstimate$681.59Shop/Dealer Price$825.74 - $1226.69
1994 Land Rover DiscoveryV8-3.9LService typeCar Thermostat ReplacementEstimate$250.95Shop/Dealer Price$307.47 - $437.59
1998 Land Rover DiscoveryV8-4.0LService typeCar Thermostat ReplacementEstimate$250.95Shop/Dealer Price$307.47 - $437.59
1995 Land Rover DiscoveryV8-3.9LService typeCar Thermostat ReplacementEstimate$250.95Shop/Dealer Price$307.43 - $437.52
2002 Land Rover DiscoveryV8-4.0LService typeCar Thermostat ReplacementEstimate$352.61Shop/Dealer Price$432.09 - $615.25
2000 Land Rover DiscoveryV8-4.0LService typeCar Thermostat ReplacementEstimate$361.33Shop/Dealer Price$442.95 - $632.62
1997 Land Rover DiscoveryV8-4.0LService typeCar Thermostat ReplacementEstimate$255.95Shop/Dealer Price$312.23 - $442.17
2001 Land Rover DiscoveryV8-4.0LService typeCar Thermostat ReplacementEstimate$359.61Shop/Dealer Price$439.63 - $623.19
Show example Land Rover Discovery Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(114)

Rating Summary
106
5
1
0
2
106
5
1
0
2

Ramon

19 years of experience
157 reviews
Ramon
19 years of experience
Rover Discovery 1996 - Bleed Brakes - Tucson, AZ
Ramon did a great job in accessing exactly what my vehicle needed. He finished the job quickly and gave me a recommendation on a few things I will need to do in the future. He is extremely knowledgeable and is now my trusted mechanic! Thank you!

Christopher

3 years of experience
23 reviews
Christopher
3 years of experience
Rover Discovery 2000 - Fan speed control is not working - Denver, CO
Very friendly and honest.

Christopher

3 years of experience
23 reviews
Christopher
3 years of experience
Rover Discovery 2000 - Oil Change - Denver, CO
Very friendly and honest.

Chris

15 years of experience
2435 reviews
Chris
15 years of experience
Rover Discovery 2004 - Car starts and then dies - Canyon Lake, CA
Chris tried everything that he could, to get the rover working. We are going to donate it to a company. We would like to thanks Chris for all of his efforts, it was truly appreciated. Great job anyway.

Excellent Rating

(114)

Rating Summary
106
5
1
0
2
106
5
1
0
2
Number of Land Rover Discovery services completed
1254+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

How Do Secondary Defoggers Work?
Your Your car is equipped with two defoggers/defrosters. The primary one is in the front, and it’s tied into your air conditioner. Turn the controls to defrost, set your temperature, and then turn on the fan and you can watch...
Symptoms of a Bad or Failing Trunk Lock Actuator
Common signs include the trunk not opening even after hearing a click, the release buttons not working, and an actuator that doesn't stop clicking.
Speed Limits, Laws, and Fines for All States
One aspect of safe driving includes being aware of the speed limits and its corresponding laws, which may vary from state to state.

Air conditioning blockage pressure - 1988 Mercedes-Benz 300TE

Hey there. The condenser is blocked or the expansion valve is stuck causing the problem. Make sure when testing you have proper air flow across the condenser. If the fan clutch is not working good then the pressures will be...

When the car is about to just fully stop it makes a squeaking noise to what seems to be in the rear breaks

Hello. This is likely the result of the brake pads wearing down to the "wear mark" which a certain thickness on the brake pads designed to alert when it is times to consider replacing the brake pads. This is not...

I have a brand new starter installed in a 1998 Dodge Ram 1500 5.9l V8 magnum and it only clicks I have also replaced the relay wha

Hi Jasper. Thanks for contacting us tonight. There are several possible sources of this issue. The most common is the starter relay being damaged, but if you've replaced it, you can remove that from the equation. The second would be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com