logo

Land Rover Discovery Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(124)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(124)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Land Rover Discovery Control Arm Assembly Replacement is $209 with $69 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Land Rover DiscoveryV8-4.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$292.14Shop/Dealer Price$332.73 - $440.31
2001 Land Rover DiscoveryV8-4.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$312.33Shop/Dealer Price$350.46 - $456.21
2004 Land Rover DiscoveryV8-4.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$923.94Shop/Dealer Price$1088.44 - $1567.29
2002 Land Rover DiscoveryV8-4.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$283.13Shop/Dealer Price$320.67 - $425.96
1996 Land Rover DiscoveryV8-4.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1734.39Shop/Dealer Price$2137.32 - $3332.99
1997 Land Rover DiscoveryV8-4.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1734.39Shop/Dealer Price$2134.99 - $3328.91
2000 Land Rover DiscoveryV8-4.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$283.13Shop/Dealer Price$320.69 - $426.01
1995 Land Rover DiscoveryV8-3.9LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1734.39Shop/Dealer Price$2134.74 - $3328.48
Show example Land Rover Discovery Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Land Rover Discovery services completed
1364+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(124)
Rating Summary
116
5
1
0
2
116
5
1
0
2

Zachary

6 years of experience
34 reviews
Request Zachary
Zachary
6 years of experience
Request Zachary
by Dahne
Land Rover Discovery V8-4.0L - Spark Plugs - Miami, Florida
Excellent and friendly service A+++

Brandon

19 years of experience
275 reviews
Request Brandon
Brandon
19 years of experience
Request Brandon
by Brian
Land Rover Discovery V8-4.6L - Transfer Case Fluid - Alpharetta, Georgia
Brandon does a great job. He is polite, thorough and explains things to you before, during, and after the repair. I highly recommend him for any automotive repair.

Tinashe

14 years of experience
781 reviews
Request Tinashe
Tinashe
14 years of experience
Request Tinashe
by Brian
Land Rover Discovery V8-4.6L - Car is not starting - Cumming, Georgia
Highly recommended. Very thorough, polite and helpful. A+.

Jay

38 years of experience
1035 reviews
Request Jay
Jay
38 years of experience
Request Jay
by Ombeni
Land Rover Discovery V8-4.6L - Check Engine Light is on - Yucaipa, California
None

Excellent Rating

(124)
Rating Summary
116
5
1
0
2
116
5
1
0
2
Number of Land Rover Discovery services completed
1364+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

Symptoms of a Bad or Failing Front Axle Engagement Switch
If your car has four-wheel drive but the system cannot engage, gets stuck, or does not activate, consider replacing the front axle engagement switch.
Read more
Symptoms of a Bad or Failing Reverse Light Bulb
If your car's reverse lights don't illuminate or are dimming, it may be time to replace the reverse light bulbs.
Read more
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in South Dakota
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in South Dakota through the Universal Technical Institute.
Read more

Can a leaky CV axle seal ruin a CV axle?

The oil leak itself may not necessarily ruin the CV axle, however if the oil leak progresses to a point where the CV joint lacks the proper amount of oil to sufficiently lubricate it, the lack of lubrication can cause...
Read more

How do I replace a 2002 Monte Carlo power steering line?

Hello. There are two lines associated with the power steering pump. One of which is a high pressure line, while the other is a low pressure line. On your particular make and model, it is the high pressure line that...
Read more

Valve lifter replacement, can't get TDC. Do I need to get TDC for head removal and lifter switch?

Hi there. Before removing the cylinder head the rocker arms and the push rods need to be removed. When removing the rocker arms, they will need to be loose and not tight. You do not need TDC, but close to...
Read more
  1. Home
  2. Estimates
  3. Land Rover
  4. Discovery
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE