Kia Telluride Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3,904)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3,904)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Kia Telluride Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Kia TellurideV6-3.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2021 Kia TellurideV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Kia TellurideV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Kia Telluride Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(3,904)

Rating Summary
3,715
98
22
10
59
3,715
98
22
10
59

Tinashe

13 years of experience
614 reviews
Tinashe
13 years of experience
Kia Optima L4-2.0L Turbo - Windows - Kennesaw, Georgia
He was on time, very polite, did a great job for me. He is the best !!!!

Robert

20 years of experience
1098 reviews
Robert
20 years of experience
Kia Optima L4-2.4L - Windows - Broomfield, Colorado
Robert was very professional and friendly during his investigation into my car problem; and although it turned out that my particular issue will have to be addressed by the dealership, I wouldn't hesitate to utilize Your Mechanic again... and preferably having Robert to do the service.

Jasmine

23 years of experience
102 reviews
Jasmine
23 years of experience
Kia Sorento L4-2.4L - Windows - Milwaukee, Wisconsin
Very punctual and professional. Explanation clear and easy to understand. Looking forward to working with you for future concerns about my vehicle.

Carlos

17 years of experience
57 reviews
Carlos
17 years of experience
Kia Sorento V6-3.3L - Spark Plugs - Tracy, California
Carlos was very professional and friendly. He explained the process, performed my scheduled service, and left my driveway as clean as when he arrived.

Excellent Rating

(3,904)

Rating Summary
3,715
98
22
10
59
3,715
98
22
10
59
Number of Kia services completed
42944+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

How Much Does a Mechanic Make in Maryland?
Automotive technician jobs in Maryland have an average mechanic salary of $45k, which is higher than the national average.
10 Best Work Boots for Auto Mechanics
Automotive technician jobs require footwear that provide safety, durability, and comfort. Work boots that are fit for mechanics start around $84.
B1267 OBD-II Trouble Code: Servo Motor Airintake Right Circuit Failure
B1267 means there is a malfunction with the servo motor air intake right circuit, likely caused by a faulty server, stuck vent, or damaged component.

car wont shift out of first gear.

Hello, the concern you have I strongly advise not to drive. The issue needs to be addressed, the vehicle will become inoperable. The automatic transmission has 3 systems; electronic, hydraulic, and mechanical. What describe could be an internal mechanical...

WHY I ALWAYS RECIEVE MEESAGE 2012 honda CIVIC usb unsupported

It can be as simple as the usb cable. The small tabs in the connector are very small and fragile. If they are bent even in the slightest, you can lose connection. Try another cable. Also, try another device. If...

Hey Larry it's Carl from last night. Just got back on this and did a bunch of diagnostics z(had to work this morning) FYI its the P420 code on a 2010 Equinox 3.4l 4-cyl 1. Bank 1 sensor varied from .2v to.9 v at idle & 2000rpm (fuel trim varied from -3%-8%to16% 2. Bank 2 sensor remained consistent .69v to.75v at idle and 2000rpm 3. Backpressure at up & Down stream O2 sensors are at 1.25-1.5psi 4. Found small leak at muffler exit/tail pipe of the vehicle (see attached) It’s in the muffler seam at the hanger weld (cant believe that would throw the code)

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com