Kia Sportage Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Kia Sportage Brake Master Cylinder Replacement is $257 with $117 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Kia SportageL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$582.38Shop/Dealer Price$692.83 - $1016.06
2000 Kia SportageL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$379.31Shop/Dealer Price$439.47 - $615.84
2016 Kia SportageL4-2.4LService typeBrake Master Cylinder ReplacementEstimate$853.04Shop/Dealer Price$1010.88 - $1477.71
2016 Kia SportageL4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$853.04Shop/Dealer Price$1010.88 - $1477.71
1998 Kia SportageL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$568.91Shop/Dealer Price$677.97 - $997.66
2018 Kia SportageL4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$808.01Shop/Dealer Price$965.16 - $1430.77
2015 Kia SportageL4-2.4LService typeBrake Master Cylinder ReplacementEstimate$718.50Shop/Dealer Price$842.73 - $1208.67
2005 Kia SportageV6-2.7LService typeBrake Master Cylinder ReplacementEstimate$584.41Shop/Dealer Price$695.87 - $1026.08
Show example Kia Sportage Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Kia Sportage Brake Master Cylinder Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Nissan 370Z
Whether Whether you opt for the roadster or the coupe in the 2012 Nissan 370Z, you will be choosing a machine that will provide outstanding performance and a luxurious interior that you won’t be able to tear yourself away from....
How to Buy a Good Quality Backseat Baby Monitor
Parents Parents know just how hard it is to keep their little ones safe and secure. That most certainly applies to traveling in the car. You need to be able to keep an eye on your baby at all times,...
P2146 OBD-II Trouble Code: Fuel Injector Group “A” Supply Voltage Circuit/Open
P2146 code definition Fuel Injector Group “A” Supply Voltage Circuit/Open What the P2146 code means P2146 is an OBD-II generic code for...

I changed the coil pack spark plugs and plug wires my car still runs bad why

If the engine is running bad then you should be getting a code set in the computer. If not, then a scanner should be used to view data to see if the engine is running lean or rich. Check the...

Red blinking light under dash

Hello, thank you for writing in. If there are no warning lights illuminated on the dashboard, you should have nothing to worry about. With that being said, the flashing bulb under the dash is most likely the security system warning...

I have a 2007 chevy impala ltz with 3 codes coming on P0121 / P1516 / P2135 ,accelerater pedal an throttle body have been replaced

Trouble Code P0121 (https://www.yourmechanic.com/article/p0121-obd-ii-trouble-code-tps-a-circuit-range-performance-problem-by-jay-safford) can set if there are faults in the wiring or terminal connections to the throttle/accelerator position sensor. Circuity integrity should be checked and the output of the sensor should be viewed on a scan tool to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com