Kia Spectra5 Brake Master Cylinder Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Kia Spectra5 Brake Master Cylinder Replacement is $320 with $180 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2008 Kia Spectra5L4-2.0L	Service typeBrake Master Cylinder Replacement	Estimate$515.68	Shop/Dealer Price$609.45 - $882.66
2009 Kia Spectra5L4-2.0L	Service typeBrake Master Cylinder Replacement	Estimate$506.67	Shop/Dealer Price$598.67 - $870.56
2006 Kia Spectra5L4-2.0L	Service typeBrake Master Cylinder Replacement	Estimate$506.67	Shop/Dealer Price$598.70 - $870.60
2007 Kia Spectra5L4-2.0L	Service typeBrake Master Cylinder Replacement	Estimate$506.67	Shop/Dealer Price$598.70 - $870.60
2005 Kia Spectra5L4-2.0L	Service typeBrake Master Cylinder Replacement	Estimate$816.91	Shop/Dealer Price$987.97 - $1493.66

Show example Kia Spectra5 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
The amount of friction material remaining on the brake pads and brake shoes should be verified.
Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(41)

Rating Summary

39

1

0

0

1

39

1

0

0

1

SEE REVIEWS NEAR ME

Chuy

15 years of experience

503 reviews

Chuy

15 years of experience

by Steven

Kia Spectra5 L4-2.0L - Serpentine/Drive Belt - Oak Lawn, Illinois

Great mechanic, nice guy. Finished in amazing time, would recommend to all family and friends for sure!

Russell

25 years of experience

356 reviews

Request Russell

Russell

25 years of experience

Request Russell

by Lisa

Kia Spectra5 L4-2.0L - Power Window Switch Replacement (Passenger Side Front) - Oregon City, Oregon

Russell was great! Very professional, even though the dealership ordered the wrong part for my window switch, was able to get the right part and was able to fit me in to fix it! Love having 4 functional windows!

Joel

12 years of experience

177 reviews

Joel

12 years of experience

by Robin

Kia Spectra5 L4-2.0L - Serpentine/Drive Belt - Lewisville, Texas

This was .y second service appointment. Impressed once again with Joel's expertise. Very professional and courteous. He also took the time to go over the repairs in detail which he completed Another job, well done!

Rusty

24 years of experience

567 reviews

Rusty

24 years of experience

by Tonya

Kia Spectra5 L4-2.0L - Clutch Master Cylinder - Arlington, Texas

Did what he could but my clutch ended up being out and they don't do those types of repairs.

Excellent Rating

(41)

Rating Summary

39

1

0

0

1

39

1

0

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

How to Put a Truck Cap on Your Pickup

Truck caps go on pickup truck beds to protect items from weather and theft. Camper shells, canopies, truck caps, and work caps are common cap styles.

Mobile Mechanics 101: The Essential Mobile Car Repair Guide

What you need to know about mobile mechanics: repairs and maintenance services they provide, and pros & cons versus a repair shop.

Can Dirt and Mud Ruin Windshield Wiper Blades?

Your Your wiper blades are responsible for clearing a viewable path on your windshield so you can see where you’re going. They wipe away rain, snow, ice, dust, dirt, bird droppings, and any other debris that ends up on the...

check engine light on, 1990 Subaru Legacy

Hi there, thanks for writing in about your 1990 Subaru Legacy. You need to have the fuel pressure tested to see if the fuel pressure is within specifications and will hold pressure after testing with engine off. The fuel pressure...

My transmission is shifting improperly from 1st to 2nd

Hi there. There are a few sensors that can cause this as well as some mechanical issues in the transmission. Even though the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is not coming on I always start by checking the computer for any...

My car is making a clicking noise when I take my foot off the accelerator

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com