Kia Rio5 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Kia Rio5 Brake Master Cylinder Replacement is $324 with $184 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Kia Rio5L4-1.6LService typeBrake Master Cylinder ReplacementEstimate$527.82Shop/Dealer Price$624.63 - $906.94
2006 Kia Rio5L4-1.6LService typeBrake Master Cylinder ReplacementEstimate$513.35Shop/Dealer Price$607.02 - $883.92
2011 Kia Rio5L4-1.6LService typeBrake Master Cylinder ReplacementEstimate$518.81Shop/Dealer Price$613.87 - $894.88
2010 Kia Rio5L4-1.6LService typeBrake Master Cylinder ReplacementEstimate$518.81Shop/Dealer Price$613.87 - $894.88
2007 Kia Rio5L4-1.6LService typeBrake Master Cylinder ReplacementEstimate$513.35Shop/Dealer Price$608.52 - $886.54
2009 Kia Rio5L4-1.6LService typeBrake Master Cylinder ReplacementEstimate$518.81Shop/Dealer Price$614.01 - $895.13
Show example Kia Rio5 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Kia Rio5 L4-1.6L - Engine hesitates during acceleration - La Vergne, Tennessee
Very professional

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Kia Rio5 L4-1.6L - Car is not starting - Oakland, California
No complaints. Happy w\ service provided. Tien Phan was polite, friendly, and he did good job explaining the work being completed and reccommended. Tien did a great job replacing battery and performing diagnostic inspection. Will recommend your mechanic.com and Tien Plan. Thanks again.

Luis

5 years of experience
302 reviews
Luis
5 years of experience
Kia Rio5 L4-1.6L - Car is shaking or vibrating - Richmond, Virginia
Very nice person. Would recommend and use services if ever needed again. Thank you Luis.

Mathew

7 years of experience
118 reviews
Mathew
7 years of experience
Kia Rio5 L4-1.6L - Pull/Clear CEL Codes - Philadelphia, Pennsylvania
Professional and quick.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1
Number of Kia Rio5 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

Is It Safe to Drive with the Check Engine Light On?
The check engine light is tied into your car’s onboard diagnostics system, and it’s designed to light up (usually in yellow) whenever...
Which Filters in My Car Can Be Cleaned Vs. Replaced?
Car filters clean the air and fluids in your car interior and engine. You can clean the air filter, but you always have to replace the oil filter.
B1939 OBD-II Trouble Code: Air Bag Passenger Pressure Switch Circuit Short to Ground
B1939 means there is an issue with the air bag pressure switch on the passenger side, likely due to a malfunction in the switch or module.

How Does a Heads-Up Display Operate?

In simplest terms the HUD or heads up display (https://www.yourmechanic.com/question/how-does-a-heads-up-display-operate) works by reflecting light off the windshield to display gauges and other vital driver information in order to reduce or eliminate the need to look away from the road ahead....

1995 GMC Yukon won't start

The GMC Yukon 1995 came with 2 different motors and the 5.7 was the most common. The most common problems with this vehicle from most to least common are: the fuel pump and filter, starter motor, ignition module, crankshaft position...

My car is turning off while I idle

Hello. If the car will not hold a charge then either the new alternator is not charging or there is another electrical issue. Most of the time this is caused by a bad connection at the alternator. As for the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com