Kia Rio Noise from engine or exhaust Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(351)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(351)

Noise from engine or exhaust Inspection Service

How much does a Noise from engine or exhaust Inspection cost?

On average, the cost for a Kia Rio Noise from engine or exhaust Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Kia RioL4-1.6LService typeNoise from engine or exhaust InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2002 Kia RioL4-1.5LService typeNoise from engine or exhaust InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Kia RioL4-1.6LService typeNoise from engine or exhaust InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Kia RioL4-1.6LService typeNoise from engine or exhaust InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2013 Kia RioL4-1.6LService typeNoise from engine or exhaust InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2008 Kia RioL4-1.6LService typeNoise from engine or exhaust InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Kia RioL4-1.6LService typeNoise from engine or exhaust InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2020 Kia RioL4-1.6LService typeNoise from engine or exhaust InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Kia Rio Noise from engine or exhaust Inspection prices

Your car’s engine makes quite a racket. Some sounds are music to the ears like the exhaust note of a finely tuned V12. (Some manufacturers have resorted to placing speakers under the dash to simulate the sound.) On the other hand, some are cries for help, such as the jolt of a backfire, the snake-like hiss of a ruptured hose, or the incessant tapping of a defective lifter.

Common reasons for this to happen:

Here’s a guide to engine noises and some potential causes.

Whirring

Description: A vibrating or buzzing, much like the sound a window fan makes when turned on.

Cause: A whirring sound that changes in relation to engine speed could indicate trouble brewing under the hood. There are a myriad of possible causes, typically on belt driven accessories or the belt(s) themselves. Your mechanic will start by listening to the bearings of your alternator, idler, and tensioner pulleys. If no problem is found, the water pump is a likely culprit.

Hissing, Gurgling, and/or Sizzling

Description: Hissing sounds like air or steam escaping from a pipe or hose. Sizzling is like a slice of bacon in a hot griddle.

Cause: These three sounds often go hand-in-hand with an overheating engine. The hissing means your cooling system has possibly developed a leak. Gurgling sounds like a coffee pot percolating, and is the result of coolant boiling (which is abnormal in a properly operating system). Sizzling is the result of that coolant or oil landing on a heated engine component like, say, the exhaust manifold. The best course of action is to pull over as soon as safely possible, let the engine cool down and call a mechanic. If the car isn’t overheating but is still hissing, other possible maladies include a clogged exhaust and catalytic converter, but these are usually associated with more noticeable problems driving.

Loud Exhaust Note

Description: We are not talking about a throaty, grumbling, wonderfully musical exhaust note. No. We are talking about loud noises that occur unintentionally and suddenly.

Cause: The most likely perpetrator here will be a broken muffler or exhaust pipe. If a loss in performance accompanies that noise, then the problem is likely something deeper, possibly a cracked exhaust manifold or broken catalytic converter.

Backfires

Description: A blast from an M-80. Technically, a backfire is fuel detonating outside the combustion chamber. It can occur in either the intake system or the exhaust system, depending on the cause.

Cause: The most common is moisture or water in the fuel system. While your car’s gas tank may be tightly sealed, H2O can still seep in as the result of condensation caused by changes in humidity and/or dramatic swings in outside temperatures. The fuel filter should remove it, but some water can get by, especially if the filter is old. An unbalanced air-to-fuel mixture is the suspect of interest here, and may be from leaky vacuum hoses or a malfunctioning air intake valve.

Sputtering

Description: Imagine a jerking action from the engine and/or powertrain. The engine indiscriminately loses power, or rpms fluctuate, as the driver accelerates.

Cause: An incomplete combustion event. While this doesn’t sound dire, it can cause serious damage to other engine components, specifically catalytic converters. On 1996 and later models, a misfire will typically be accompanied by a flashing check engine light.. Have the technician check the ignition system, not just simply replace the spark plugs. This includes examining the ignition coil, rotor, cap, and wires (if so equipped).

A blocked or malfunctioning fuel injector will also cause your car to sputter. In some cases, it may be accompanied by a steady clicking sound.

Tapping or Clicking

Description: Imagine the sound made by a watch's movement or a ratcheting wrench. It’s a metallic tick, as though someone is striking the inside of the engine block with a metal stick in a rhythmic manner.

Cause: When tapping is engine related, it is usually more pronounced at idle, and increases in speed with engine RPM.. It may disappear at high speeds. In this case, it is probably upper valve train or tappet noise caused by either low oil pressure, excessive valve clearance or a defective hydraulic valve lifter.

The most common cause -- and easiest to remedy -- is that the engine is low on oil. Another answer is that there is some blockage in the system. Culprits could include a worn or damaged oil pump or a clogged oil filter. If you haven't had your oil and filter changed in a while, consider doing so immediately.

If it's not an oil issue, it's potentially related to the valve train, as we stated above; i.e., a serious internal engine problem that is preventing normal oil pressure from reaching the upper valve train components.

Spark Knocking (Preignition)

Description: A light, metallic knocking sound, usually under acceleration.

Cause: Knocking is most commonly attributed to improper ignition timing, lean air/fuel ratio, overheating, or improper fuel octane level.

It's a common misconception that there are benefits to using a higher-octane gasoline in your vehicle than the owner's manual specifies; however, using a lower-grade fuel can very well produce engine knock.

Bearing Knock

Description: Bearing knock is typically a deeper tone, directly related to engine RPM.

Cause: It is typically associated with excessive main bearing clearance (a regular, rumble-like knock), worn connecting rod bearings (sharp, irregular knock).Bearing knocks usually involve labor-intensive repairs. The good news is, regularly performed preventative maintenance (oil and filter changes) will typically prevent bearing damage from occurring for the life of your vehicle.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine or exhaust noise, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will typically begin by listening to identify the general source of the noise. In the case of potential belt or accessory noise, a stethoscope is used while the engine is running to listen to individual bearings under load. A noise that has a corresponding drivability concern (misfire, preignition), will usually be approached with a scanner or code reader, to determine which electrical system may be malfunctioning. Internal engine noises (knock, tick) will almost always begin by checking the engine oil level. If the oil level and condition are acceptable, a more extensive disassembly may be required.

How important is this service?

Given that a noise can indicate a minor or major issue, it's wise to book a mechanic to perform an inspection as soon as possible and learn promptly what's at the root of the engine or exhaust noise.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(351)

Rating Summary
330
14
1
2
4
330
14
1
2
4

Carlos

28 years of experience
502 reviews
Carlos
28 years of experience
Kia Rio L4-1.5L - Noise from engine or exhaust - Fontana, California
Excellent as always.

Claud

8 years of experience
482 reviews
Claud
8 years of experience
Kia Rio L4-1.6L - Oil Change - Harrison Township, Michigan
Claud was very polite,professional and on time. What a great experience. Will recommend his service to family and friends. Thank you Claud job well done.

Kurt

38 years of experience
33 reviews
Kurt
38 years of experience
Kia Rio L4-1.6L - Valve Cover Gasket - Boynton Beach, Florida
Great job very professional will request him next time i need service .pointed out other issues i need to get fixed.thanks for a great job

Matthew

33 years of experience
1222 reviews
Matthew
33 years of experience
Kia Rio L4-1.6L - Crankshaft Position Sensor - Norfolk, Virginia
At every service Matthew arrives on time. He always completes the services in a timely manner. He answers all my questions as well as advice on how to maintain my car.

Excellent Rating

(351)

Rating Summary
330
14
1
2
4
330
14
1
2
4
Number of Kia Rio services completed
3861+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

What's the Difference Between a Code Reader and a Code Scanner?
In In order to determine why your Check Engine Light is on, a mechanic will connect a handheld device to the OBD II connector under your dash (in a vehicle made in 1996 and onward). This lets the mechanic access...
Symptoms of a Bad or Failing Dome Light Bulb
If your car's dome light is dim, flickering, or not functioning, you may need to replace the dome light bulb.
P0031 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 1 Sensor 1)
P0031 trouble code definition P0031 is the code for HO2S Heater Control Circuit Low (Bank 1 Sensor 1) What the P0031 code...

Where do I find the emissions control label?

The emissions control label gives you important information about the emissions system in the car, and what regulations it meets. This information may be necessary during emissions testing. You’ll find the label on the underside of the hood, on the...

Diesel vs. gasoline engines

I usually say gasoline instead of petrol. But I like a gasoline engine more than diesel (https://www.yourmechanic.com/article/what-is-the-difference-between-a-diesel-and-a-gasoline-engine) ones. I'm not a diesel fan and here is the reason, diesels all smell to some extent and they put out a lot...

Car hesitates or stalls before accelerating. Diagnostics test says: Bank 1 System too lean.

Hi there. Yes, a torn throttle body hose will definitely cause your concerns. Taping the boot is not a proper repair, nor will it correct the situation. The boot has to be replaced. The torn boot is allowing unmetered air...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com