Kia Cadenza Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Kia Cadenza Hazard / Turn Signal Flasher Replacement is $137 with $42 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Kia CadenzaV6-3.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$321.45Shop/Dealer Price$383.07 - $545.41
2015 Kia CadenzaV6-3.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.08 - $525.44
2016 Kia CadenzaV6-3.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.08 - $525.44
2017 Kia CadenzaV6-3.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.06 - $525.40
2018 Kia CadenzaV6-3.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$179.87Shop/Dealer Price$211.12 - $282.31
Show example Kia Cadenza Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(16)

Rating Summary
15
1
0
0
0
15
1
0
0
0

Luis

15 years of experience
181 reviews
Luis
15 years of experience
Kia Cadenza V6-3.3L - Battery - Las Vegas, Nevada
satisfied back on the road again

Rusty

23 years of experience
515 reviews
Rusty
23 years of experience
Kia Cadenza V6-3.3L - Brake Pads Replacement (Front) - Arlington, Texas
This eas the first time I've used Your Mechanic. It won't be my ladt. Rusty was perfect. On time, fast and competent. The kind of Mechanic you sesrch for. Three Words: Convenient, Quality, Price. All 5 stars.

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Kia Cadenza V6-3.3L - Pre-purchase Car Inspection - Deland, Florida
Jamahl goes above and Beyond

Joel

11 years of experience
150 reviews
Joel
11 years of experience
Kia Cadenza V6-3.3L - Parking brake won't release Inspection - Frisco, Texas
Joel showed up on time, with all of the necessary tools for troubleshooting an odd issue. He did a great job in finding the root cause and if the parts are available outside the dealer I look forward to him completing the repairs.

Excellent Rating

(16)

Rating Summary
15
1
0
0
0
15
1
0
0
0
Number of Kia Cadenza services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Get a New Mexico Driver's Permit
Like Like many other states, New Mexico uses a graduated licensing program that requires all new drivers under 18 years old to begin driving under supervision, in order to practice safe driving before getting their full driver’s license. In order...
How to Obtain a G1 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide and practice test to be a G1 Maintenance and Light Repair Technician.
P0533 OBD-II Trouble Code: A/C Refrigerant Pressure Sensor Circuit High Input
P0533 means the A/C refrigerant pressure is too high to safely function often due to inoperative cooling fans or too little or too much refrigerant.

What can cause intermittent cold starting fault?

This may be related to a cold start enrichment problem which is generally controlled by the coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement). This sensor relays the temperature of the engine coolant to the computer which then makes fuel adjustments based upon the...

My coolant reservoir is empty and coolant is splattered over my engine

Driving a car with "zero" coolant will destroy the engine within minutes. Even after a coolant leak, though, you have some coolant in the engine and water can sometimes be added to enable one to drive a "short" distance as...

Maintenance light keeps coming on

I'm assuming you're talking about the maintenance required light. If the light keeps coming back on, it means that it is not getting properly reset at the time of service. The reset procedure varies, depending on whether your vehicle is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com