Kia Amanti Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(80)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(80)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Kia Amanti Valve Cover Gasket Replacement is $489 with $237 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Kia AmantiV6-3.8LService typeValve Cover Gasket ReplacementEstimate$939.38Shop/Dealer Price$1068.78 - $1432.66
2008 Kia AmantiV6-3.8LService typeValve Cover Gasket ReplacementEstimate$912.35Shop/Dealer Price$1036.45 - $1396.36
2004 Kia AmantiV6-3.5LService typeValve Cover Gasket ReplacementEstimate$871.66Shop/Dealer Price$1027.23 - $1486.40
2006 Kia AmantiV6-3.5LService typeValve Cover Gasket ReplacementEstimate$871.66Shop/Dealer Price$1027.23 - $1486.39
2005 Kia AmantiV6-3.5LService typeValve Cover Gasket ReplacementEstimate$1017.65Shop/Dealer Price$1179.20 - $1642.85
2007 Kia AmantiV6-3.8LService typeValve Cover Gasket ReplacementEstimate$912.35Shop/Dealer Price$1036.94 - $1397.22
Show example Kia Amanti Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(80)

Rating Summary
71
4
0
0
5
71
4
0
0
5

Michael

25 years of experience
138 reviews
Michael
25 years of experience
Amanti 2004 - Check Engine Light is on - Noblesville, IN
Good experience. Knew what he was talking about. Would recommend to a friend or family member.

Jermaine

22 years of experience
147 reviews
Jermaine
22 years of experience
Amanti 2006 - Camshaft Position Sensor - Silver Spring, MD
Very curious and efficient

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
Amanti 2006 - Camshaft Position Sensor - Arlington, TX
Rusty did a great job. Done in about an hour and 30 minutes!! I will use him again.

Collins

8 years of experience
362 reviews
Collins
8 years of experience
Amanti 2007 - Power Steering Fluid Reservoir - Atlanta, GA
Real friendly guy and an excellent mechanic. Did great work

Excellent Rating

(80)

Rating Summary
71
4
0
0
5
71
4
0
0
5
Number of Kia Amanti services completed
880+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Audi Q7 TDI
If If you’re looking for a luxury crossover that has all the high-end amenities and plenty of power and fuel economy, you’ve found it in the 2012 Audi Q7 TDI. Fans of the Q7 will immediately recognize the overall look...
The Guide To Colored Curb Zones in Maine
Maine Maine parking laws: understanding the basics Maine drivers will understand the importance of safe driving whether in the city or on back roads through the woods. They know that they need to follow the laws of the road so...
How Long Does a Shift Indicator (Automatic Transmission) Last?
When When you put your transmission in drive, your car is able to move forward. When you shift to reverse, you can back up. However, you need to know what gear you’re moving your car’s transmission into in order to...

I get trouble code P2138, but I have cleared it and the car works for a while. Now I am getting trouble code P2127 along with P2138.

Hi there. The pedal position sensor on the gas pedal has lost signal for the switch 'E' and 'D'. The code P2138 (https://www.yourmechanic.com/article/p2138-obd-ii-trouble-code-throttle-pedal-position-sensor-switch-d-e-voltage-correlation-by-andrew-quinn) means that the computer has discovered a malfunction with the pedal sensor. Check the harness to the...

How much for an oil change, battery change and alignment cost?

Billing question sent to CS for the cost of replacing the battery, changing the engine oil, and performing an alignment.

heater ac blower has no power bad ground wire

On your vehicle, the ground may be switched through a controller. If you bypass the controller and directly ground the blower it will run at only one speed, namely high. If you do not have the vehicle wiring diagram, or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com