Jeep Renegade Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(51)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(51)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Jeep Renegade Control Arm Assembly Replacement is $447 with $333 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep RenegadeL4-1.4L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$929.76Shop/Dealer Price$1119.08 - $1635.29
2018 Jeep RenegadeL4-2.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$779.27Shop/Dealer Price$957.61 - $1465.59
2018 Jeep RenegadeL4-2.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$779.27Shop/Dealer Price$957.61 - $1465.58
2018 Jeep RenegadeL4-1.4L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$779.27Shop/Dealer Price$957.58 - $1465.54
2018 Jeep RenegadeL4-1.4L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$779.27Shop/Dealer Price$957.63 - $1465.62
2018 Jeep RenegadeL4-1.4L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$779.27Shop/Dealer Price$957.61 - $1465.58
2018 Jeep RenegadeL4-1.4L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$785.27Shop/Dealer Price$963.45 - $1471.30
2018 Jeep RenegadeL4-2.4LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$895.26Shop/Dealer Price$1085.16 - $1601.81
Show example Jeep Renegade Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(51)

Rating Summary
50
0
1
0
0
50
0
1
0
0

Alex

20 years of experience
137 reviews
Alex
20 years of experience
Jeep Renegade L4-2.4L - Oil Change - Aurora, Illinois
Very happy with the service

Jason

32 years of experience
507 reviews
Jason
32 years of experience
Jeep Renegade L4-2.4L - Car is not starting Inspection - Richardson, Texas
Jason was friendly and informative. Upfront with cost and issues.

Jacob

15 years of experience
74 reviews
Jacob
15 years of experience
Jeep Renegade L4-2.4L - Pre-purchase Car Inspection - Buford, Georgia
Jacob was very thorough when he checked me car, it is almost out of warranty so i wanted to make sure everything looked good before i lost the bumper to bumper warranty. He gave great recommendations and spotted something the dealership missed. Thanks Jacob!

Phillip

19 years of experience
310 reviews
Phillip
19 years of experience
Jeep Renegade L4-2.4L - Squealing noise when steering wheel is turned - Folsom, California
Phillip was great. He explained the situation to me very well.

Excellent Rating

(51)

Rating Summary
50
0
1
0
0
50
0
1
0
0
Number of Jeep Renegade services completed
561+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Wildlife on the Road
According According to the Federal Highway Administration (http://www.fhwa.dot.gov/publications/publicroads/15marapr/03.cfm), there are currently more than 8 million lane-miles of roads throughout the US, with over 6 million of those in rural areas. One important danger of driving in rural areas is the...
How Long Does a Cruise Control Switch Last?
The The cruise control switch is mounted on the steering wheel of your vehicle and is intended to make driving less strenuous. Once you choose a speed, you can depress the cruise control switch, and your vehicle will stay at...
P0649 OBD-II Trouble Code: Speed Control Lamp Control Circuit
P0649 means the PCM has detected a problem with the speed control lamp circuit due to a faulty speed control lamp bulb or circuit, wiring issues.

what dose it mean when your Mercedes Benz R class 350 is displaying restrained system malfunction and service E. exceeded 141 days

"Service E exceeded by 141 days" indicates your vehicle is overdue for s Service E. Check with your owner's manual or dealership service department as to what is included in a Service E. Once you find out what is included...

Won't start after putting in new alternator, battery, starter and fuses.

Hi there. Check the battery cables (https://www.yourmechanic.com/services/service-battery-cables) and make sure that they are hooked up properly. Look to see if there is an issue with a loose ground on the fuse box. When smoke comes from the battery cables, that...

I'm about to purchase a 2018 Kia Sorento with AWD. Does the AWD work in reverse?

All Wheel Drive (AWD) works in any gear the vehicle is in. There are two types of all-wheel drive: mechanical and electronic. The most common way of creating a capable, mechanical AWD system is by using three differentials. A differential...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com