Jeep FA-134 ABS Light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(20)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(20)

ABS Light is on Inspection Service

How much does a ABS Light is on Inspection cost?

On average, the cost for a Jeep FA-134 ABS Light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Jeep FA-134L4-2.2LService typeABS Light is on InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Jeep FA-134 ABS Light is on Inspection prices

How this system works:

When an issue arises with your anti-lock brake system (ABS), a corresponding light will illuminate on your dashboard. The light will display as the acronym “ABS.”

Your ABS exists to keep your car from skidding dangerously during braking. It is an automated safety system that recognizes when your wheels stop rotating (while your car is still in motion) and releases brake fluid pressure, allowing the wheels to continue to rotate. This stops your car from locking up and skidding uncontrollably, and returns the control of the vehicle to you.

Like most systems in your vehicle, your ABS can falter, and you’ll want to resolve the issue as soon as it does.

Common reasons for this to happen:

Faulty Wheel Speed Sensor

The ABS relies on information from the wheel speed sensors, which are placed inside the hub of each wheel and occasionally inside the transmission. These sensors determine the rate at which the wheels are moving, and relay that information to the ABS. When the ABS receives information that one or more of the vehicle’s wheels are moving slower than the others, the system releases brake fluid pressure, which then allows the wheels to resume movement. If the wheel speed sensor is defective, or if the wiring from the sensor to the ABS is damaged, then the ABS will not get the wheel speed information that it requires.

The wheel speed sensor is made up of two components: a metal ring with teeth attached to a drive axle or wheel bearing, and the sensor itself, which reads the teeth on the ring as the wheel rotates. As the wheel speed sensor is located very close to the braking system, the high heat generated by the brakes cause the wheel speed sensor to be more susceptible to damage. This in turn makes it one of the more common causes of the ABS light coming on.

Unresponsive Hydraulic Pump or Valve

When the wheel speed sensor alerts the ABS that the wheels are moving at different speeds, a hydraulic valve is responsible for releasing, or increasing, the brake fluid pressure to prevent the wheels from losing traction with the ground. Like all pumps and valves, those connected to the ABS are liable to become damaged and unresponsive. This may be due to internal wear typically from dirty brake fluid.

Faulty ABS Module

Corrosion on the ABS module can keep information from being relayed between the wheel speed sensor and the ABS. Corrosion is a relatively common issue, and one that can cause problems in the aforementioned wheel speed sensor wires. Even a small amount of corrosion can cause enough resistance on the wires to keep the system from working. In less common instances, the computer in the module can fail and need to be replaced.

Low Fluid Levels

The ABS relies on fluid to help regulate pressure. If the ABS fluid reservoir is low, or if there is too much air in the system, then the ABS will not be able to do its job.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the ABS issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will have a scan tool, which allows them to “talk” to the ABS module to find out what is causing the light to come on. The mechanic will check the ABS fuse, and then review the entire ABS system for problems.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(20)

Rating Summary
19
0
0
0
1
19
0
0
0
1

Jerome

34 years of experience
206 reviews
Jerome
34 years of experience
Jeep Wrangler V6-3.8L - ABS Light is on - Gaithersburg, Maryland
Extremely knowledgeable and very thorough; outstanding communicator.

Kevin

24 years of experience
536 reviews
Kevin
24 years of experience
Jeep Compass L4-2.0L - ABS Light is on - Pine Lake, Georgia
This is my first time to use this service and Kevin was helpful explaining the process.

Jean

15 years of experience
71 reviews
Jean
15 years of experience
Jeep Patriot L4-2.4L - ABS Light is on - Oldsmar, Florida
Jean was very courteous and knowledgeable.

Brian

23 years of experience
668 reviews
Brian
23 years of experience
Jeep Wrangler V6-3.6L - ABS Light is on - Orange Park, Florida
Great experience friendly and knowledgeable

Excellent Rating

(20)

Rating Summary
19
0
0
0
1
19
0
0
0
1
Number of Jeep ABS Light is on Inspection services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Nissan 370Z
Whether Whether you opt for the roadster or the coupe in the 2012 Nissan 370Z, you will be choosing a machine that will provide outstanding performance and a luxurious interior that you won’t be able to tear yourself away from....
How to Determine Compression Ratio
Whether Whether you’re building a new engine and you need the metric, or you’re curious to know how efficient your car uses fuel, you have to be able to calculate the engine’s compression ratio. There are a few equations needed...
P0425 OBD-II Trouble Code: Catalyst Temperature Sensor (Bank 1)
Trouble code P0425 means the PCM detects a lack of catalyst efficiency in the catalytic converter for engine bank 1.

Key does not turn and steering wheel locked.

The first thing I would recommend is to try turning the wheel and the key at the same time. Sometimes it is possible for the steering lock to bind the ignition cylinder. Turning the wheel away from the lock can...

Given error codes P0012 and P0022

If your vehicle was built prior to April 2009, there is a TSB for this exact issue. When both of these codes appear simultaneously, it is the fault of the timing solenoids. The TSB states to replace the timing solenoids...

Horn no longer working

Start with checking the fuses, your owners manual will have a diagram explaining where the fuse boxes are and which one is for the horn. If the fuses are good, the issue could be the horn button, wiring to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com