Jaguar XJ12 Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Jaguar XJ12 Water Pump Replacement is $644 with $294 for parts and $350 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Jaguar XJ12V12-6.0LService typeWater Pump ReplacementEstimate$1423.24Shop/Dealer Price$1660.05 - $2289.48
1995 Jaguar XJ12V12-6.0LService typeWater Pump ReplacementEstimate$1387.20Shop/Dealer Price$1606.35 - $2222.53
1992 Jaguar XJ12V12-5.3LService typeWater Pump ReplacementEstimate$988.82Shop/Dealer Price$1156.40 - $1632.99
1994 Jaguar XJ12V12-6.0LService typeWater Pump ReplacementEstimate$1299.61Shop/Dealer Price$1516.21 - $2130.48
1991 Jaguar XJ12V12-5.3LService typeWater Pump ReplacementEstimate$988.82Shop/Dealer Price$1165.60 - $1649.09
1990 Jaguar XJ12V12-5.3LService typeWater Pump ReplacementEstimate$988.82Shop/Dealer Price$1157.27 - $1634.51
Show example Jaguar XJ12 Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(21)

Rating Summary
19
0
0
0
2
19
0
0
0
2

Alfredo

22 years of experience
123 reviews
Alfredo
22 years of experience
Jaguar XJ12 V12-6.0L - Car is not starting - Orlando, Florida
Alfredo is great.

Kerry

32 years of experience
27 reviews
Kerry
32 years of experience
Jaguar XJ12 V12-6.0L - Car is not starting - Snellville, Georgia
He was on time and very knowledgeable of my car. Very friendly. Would use him again. Thanks so much, car is running fine.

Corey

13 years of experience
511 reviews
Corey
13 years of experience
Jaguar XJ12 V12-6.0L - Check Engine Light is on - Charlotte, North Carolina
Great

Shawn

24 years of experience
227 reviews
Shawn
24 years of experience
Jaguar XE L4-2.0L Turbo - Water Pump - Hampton, Virginia
Professional, friendly

Excellent Rating

(21)

Rating Summary
19
0
0
0
2
19
0
0
0
2
Number of Jaguar Water Pump Replacement services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
500+
experts on our platform

Recent articles & questions

P0639 OBD-II Trouble Code: P0639 Throttle Actuator Control Range/Performance (Bank 2)
P0639 means there is an issue with the throttle actuator control, likely due to faulty wiring, or a part in throttle body is defective.
How to Replace a Lost or Stolen Car Title in Illinois
Without Without a car title, you can’t sell your car, use it as a trade-in, or even register it in another state. Obviously, it’s important that you protect this document, but that’s harder than you might think. Too many people...
How to Replace a Variable Valve Timing (VVT) Solenoid
Variable valve timing solenoids fail when the Check Engine Light comes on, fuel economy is reduced, there is a rough idle, or loss of power.

Truck is missing only when it is in gear

Hi there, thanks for writing in. If this problem only happens when you're in gear and accelerating, its very possible that it could have a transmission problem that causing a hesitation. I have seen issues like this before. It's also...

Full power but no turn over when key is turned

Hey there, I believe you are correct. The most likely cause of this issue you are having would be the ignition switch. The ignition switch is responsible for sending power from the battery to the starter when you turn the...

Rattling sound under the car.

Hi there. If you have a flex plate or a flywheel on your vehicle, the nose could be a loose bolt causing the rattling noise as the engine is running. If the noise lessens out as the engine is revved...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com