Isuzu i-370 Windshield Wiper Arm Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(312)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(312)

Windshield Wiper Arm Replacement Service

How much does a Windshield Wiper Arm Replacement cost?

On average, the cost for a Isuzu i-370 Windshield Wiper Arm Replacement is $148 with $53 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Isuzu i-370L5-3.7LService typeWindshield Wiper Arm - Rear ReplacementEstimate$221.83Shop/Dealer Price$258.54 - $346.17
2007 Isuzu i-370L5-3.7LService typeWindshield Wiper Arm - Driver Side Front ReplacementEstimate$216.43Shop/Dealer Price$256.81 - $355.40
2007 Isuzu i-370L5-3.7LService typeWindshield Wiper Arm - Rear ReplacementEstimate$201.83Shop/Dealer Price$238.56 - $326.20
2007 Isuzu i-370L5-3.7LService typeWindshield Wiper Arm - Passenger Side Front ReplacementEstimate$220.47Shop/Dealer Price$261.84 - $363.44
2008 Isuzu i-370L5-3.7LService typeWindshield Wiper Arm - Passenger Side Front ReplacementEstimate$220.47Shop/Dealer Price$261.87 - $363.51
2008 Isuzu i-370L5-3.7LService typeWindshield Wiper Arm - Driver Side Front ReplacementEstimate$216.43Shop/Dealer Price$256.81 - $355.40
Show example Isuzu i-370 Windshield Wiper Arm Replacement prices

What is the Windshield Wiper Arm all about?

The windshield wiper system is designed to keep the windshield clear in rain, snow, or when dirt and debris obstruct your view. When the windshield wiper switch is turned on, power goes to the windshield wiper motor and transmission. Linkage attaches the windshield wiper transmission to the wiper arms. The windshield wiper transmission causes the windshield wiper arms to move in a side-to-side motion against the windshield or back window to keep it clear and clean. When the windshield wipers aren’t touching the window, the wipers chatter continuously against the window when they are turned on, or the windshield wiper moves but the one or both of the wiper arms stay put, it may be time to replace your windshield wiper arms.

Keep in mind:

  • Install new wiper blades any time a windshield wiper arm is replaced.
  • Replace both windshield wiper arms at the same time.

How it's done:

  • The hood is opened and supported as needed. The wipers are put into the park position (the position where the wipers rest when not in use) before removal of the wiper arm. The position is noted by a small grease marker mark on the windshield.

  • The old wiper arm is removed from the vehicle.

  • The new wiper arm is installed and aligned with the mark on the window. Any marks are removed from the window using glass cleaner.

  • The hood is closed as required and the wipers are tested for proper operation.

  • The windshield wipers are tested for proper operation with a hose running water on the window.

Our recommendation:

The windshield wiper arms are responsible for keeping your windshield clear and maintaining your road visibility. If you can’t see the road properly because your wipers aren’t working well, schedule an inspection.

What common symptoms indicate you may need to replace the Windshield Wiper Arm?

  • Wiper blades streak
  • Wipers chatter when going back and forth
  • One or both wiper blades don’t move when turned on
  • Wiper blade doesn’t touch the window when swiping

How important is this service?

Being able to clearly see your way down the road is one of the most important factors in driving. If your wipers aren’t working properly, get the system checked right away.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(312)

Rating Summary
289
13
0
2
8
289
13
0
2
8

John

27 years of experience
1019 reviews
John
27 years of experience
Isuzu Ascender L6-4.2L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Alvin, Texas
Very good knows what he is doing

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

Toby

10 years of experience
100 reviews
Toby
10 years of experience
Isuzu Rodeo V6-3.2L - Serpentine/Drive Belt - Lewisville, Texas
Toby was friendly and knowledgeable. Work was done in a timely manner.

Nathan

17 years of experience
278 reviews
Nathan
17 years of experience
Isuzu Ascender V8-5.3L - Car is not starting - Austin, Texas
Nathan was excellent at responding, very clear on quoting, and was kind when I about had a panic attack over how much my repair would cost. No fault of his whatsoever, I was off on my own hopeful budget...LOL! I have already submitted a request for the repair and look forward to the visit.

Excellent Rating

(312)

Rating Summary
289
13
0
2
8
289
13
0
2
8
Number of Isuzu services completed
3432+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

P0105 OBD-II Trouble Code: Manifold Air Pressure (MAP) Barometric Pressure Sensor Electrical Circuit Problem
P0105 P0105 Trouble code definition Manifold Air Pressure (MAP) Barometric Pressure Sensor Electrical Circuit Problem What the P0105 code means P0105 is the general code for a problem with the MAP circuit having an electrical failure or malfunction. The MAP...
How to Inspect Car Fuses
A A fuse is a low-resistance resistor device that protects a circuit from becoming overloaded. It is a short piece of wire that is designed to melt and break apart when exposed to an excess of electrical current. A fuse...
P0706 OBD-II Trouble Code: Transmission Range Sensor Circuit Range/Performance
P0706 Code Definition The P0706 code is a generic powertrain code related to the transmission. This code is non-emission related. The transmission...

my car wont start. error shows up on dashboard

Hi there. If this occurred right after the transmission was replaced then most of the time the issue is because the transmission position sensor was not connected or installed correctly or it may have an ignition switch issue. I would...

slip indicator light staying solid

The solid illumination of the slip indicator warning light signifies a malfunction in the Vehicle Dynamic Control (VDC) system. VDC is a version of "electronic stability control" and is a very useful safety feature. Occasionally, the slip indicator light comes...

I hit a curb leaving my subdivision. I have 3 warning messages that keep popping up.

One of the data inputs to the AdvanceTrac stability control system on your car comes from the electronic wheel speed sensors that are installed at all four wheel positions. The AdvanceTrac sensor, and/or the wiring to the sensor, at the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com