Isuzu i-280 Loud noise when using the clutch Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(313)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(313)

Loud noise when using the clutch Inspection Service

How much does a Loud noise when using the clutch Inspection cost?

On average, the cost for a Isuzu i-280 Loud noise when using the clutch Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-280L4-2.8LService typeLoud noise when using the clutch InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Isuzu i-280 Loud noise when using the clutch Inspection prices

Driving a car with a manual transmission can be a lot of fun. It’s perhaps the most engaged type of driving – connecting you with the car in a very visceral way. However, drivers with manual transmissions face problems that rarely occur for drivers who have an automatic. Clutch wear and tear is one of those (all clutches wear out, and automatic transmissions use them too, but the incidence of wear is less). If you’ve noticed a loud noise when using the clutch, there’s definitely a problem, but it could be one of several different things.

How this system works:

While manual transmissions have become more advanced in the last couple of decades, they’re still simpler to understand than automatics. One of the most easily understood aspects here is how the clutch works. It’s all about friction – and it’s pretty similar to the way your brakes work, too.

When you press the clutch pedal, it engages the clutch to allow you to shift gears. The clutch presses against the flywheel, and the friction material on the clutch stops the transmission from spinning. When you let off the pedal, the clutch disengages, and the transmission is free to spin with the engine.

Operating the clutch requires having working bearings – this applies to both engaging (pressing the pedal in) and disengaging (letting off on the pedal). There are several bearings here as well, including the throw out bearing and pilot bearing.

Common reasons for this to happen:

  • Worn Throw Out Bearing: If you notice the noise from your clutch when you release the pedal, chances are good that the throw out bearing is failing and will need to be replaced.

  • Worn Pilot Bearing: If you notice noise when you press the clutch pedal in, the most likely culprit is the pilot bearing, which will need to be replaced.

  • Worn Release Bearing: Another possible cause of noise when pressing the clutch pedal in is the release bearing. If it’s making noise, then the bearing is failing and will need to be replaced.

  • Worn Clutch: It’s also possible that the clutch itself is worn and will need to be replaced. These are high wear components and need to be replaced on a regular basis. However, the frequency of replacement will depend on your driving style and habits. When replacing the clutch, it may also be necessary to have the flywheel resurfaced.

  • Worn Input Bearing: If the noise happens when the car is in neutral and you are not using the clutch at all, the most likely cause is the input bearing, which is located inside the transmission.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch and transmission operation and verify the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

One of our mechanics will inspect your clutch operation in order to verify the noise and determine the correct course of action. A test drive may be necessary to duplicate the noise. Once the mechanic has ascertained the cause of the problem, a repair can be made.

How important is this service?

If your clutch is making noise during use, it’s more than just an embarrassing annoyance. It’s a sign that there’s something going wrong. The most common problems to fit these symptoms are failed bearings (pilot, throw out and release), but a worn clutch can also cause similar issues. One of our professional mechanics can determine the actual cause of your problem and repair your clutch so you can get back on the road and enjoy peace of mind.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Brake Light Switch - Kennesaw, Georgia
Corey did an awesome job!

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

John

27 years of experience
1046 reviews
John
27 years of experience
Isuzu Ascender L6-4.2L - Window Motor / Regulator Assembly Replacement (Passenger Side Front) - Friendswood, Texas
Excellent as always John is prompt friendly efficient and happy to explain any questions or concerns I may have

Toby

10 years of experience
100 reviews
Toby
10 years of experience
Isuzu Rodeo V6-3.2L - Serpentine/Drive Belt - Lewisville, Texas
Toby was friendly and knowledgeable. Work was done in a timely manner.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

How Long Does an Anti-Lock Pressure Switch Last?
Anti-lock Anti-lock braking systems (ABS) are standard on late-model vehicles, and can greatly enhance your safety when braking in difficult conditions. If you have to stop suddenly, or if you are driving on slippery surfaces, the ABS prevents your wheels...
How Long Does a Windshield Washer Tubes Last?
Keeping Keeping a windshield clean is a big part of staying safe while on the roadways. Driving in icy or rainy conditions is not easy, especially if there is an issue with your washer tubes. These tubes are what helps...
How to Prepare for the Maine Driver’s Written Test
If If you are getting ready to become part of the driving community in Maine, the first thing you need to do is pass the driver’s written test so you can get your permit and then take your road test....

Car parts that get damaged while driving through water

When you drive through water (https://www.yourmechanic.com/article/how-to-check-for-water-damage-in-a-used-car), the electronic parts should really never get wet because it can damage them. But, with that said, the electronic power-steering systems are sealed pretty well from water. They have got seals all over. Unless,...

Can i use gaz 89 for my car

Hello. Acura of course recommends 93 premium gasoline but you will be able to use 89 mid grade gasoline as well. You would be able to use 89 but it's not the best thing for it. By using a lower...

Hello, My 2016 dodge caravan has the check engine light on. When I accelerate or go up a hill it acts like it is starving for fuel and the check engine light with flash and ding and the the van will vibrate. it will stop and then the check engine light will ding and remain solid until the next time it happens. My has miliage has also went way down

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com