Isuzu i-280 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Isuzu i-280 Control Arm Assembly Replacement is $812 with $672 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1499.42Shop/Dealer Price$1839.13 - $2850.14
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1490.41Shop/Dealer Price$1828.35 - $2838.04
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1490.41Shop/Dealer Price$1828.37 - $2838.08
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1621.80Shop/Dealer Price$1961.44 - $2972.40
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1490.41Shop/Dealer Price$1829.85 - $2840.66
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1490.41Shop/Dealer Price$1828.51 - $2838.33
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1621.80Shop/Dealer Price$1961.47 - $2972.45
2006 Isuzu i-280L4-2.8LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1490.41Shop/Dealer Price$1828.37 - $2838.08
Show example Isuzu i-280 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0

Corey

28 years of experience
43 reviews
Corey
28 years of experience
Isuzu i-280 L4-2.8L - Brake Light Switch - Kennesaw, Georgia
Corey did an awesome job!

Corey

28 years of experience
43 reviews
Corey
28 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

John

33 years of experience
1126 reviews
John
33 years of experience
Isuzu Ascender L6-4.2L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Alvin, Texas
Very good knows what he is doing

Breck

21 years of experience
681 reviews
Breck
21 years of experience
Isuzu Ascender L6-4.2L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Houston, Texas
Breck was great! He arrived on time and I'm very satisfied with his work! Will definitely recommend him to friends.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0
Number of Isuzu Control Arm Assembly Replacement services completed
22+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

How to Replace an AC Line
AC hoses are failing if the air conditioning system is not blowing cold air or the air is leaking out of the AC lines.
Disabled Driver Laws and Permits in New Jersey
In In the state of New Jersey, the Motor Vehicle Commission (MVC) provides parking permits and plates to drivers who have disabilities. If you have a disability, whether it is permanent or temporary, you can get a permit that will...
How to Get Ice Off Your Windshield
Windshields need de-icying when ice accumulates in winter. Ice is removed by scraping with a credit card, spraying de-icer, or using warm water.

My brake light stays on - 2004 Infiniti QX56

Hi there. Check the brake pedal brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement) to see if the contacts are closed (meaning the switch is engaged) with the pedal all the way up. It is possible that the brake pedal has moved down a...

98 Nissan quest jerks, skips, and rpm's bounce, when it warms up.

Hi there. The symptoms sound like the fuel pump relay (https://www.yourmechanic.com/services/fuel-pump-relay-replacement) is getting hot and cutting off the fuel pump. Check the fuel pump relay and see if its getting hot. If the relay is getting hot, then the fuel...

What is the average time for this procedure

Hi there. A professional mechanic that has secured the right tools, supplies and materials to complete these jobs should complete them in less than 10 service hours on a 2000 Chrysler Sebring.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com