Isuzu Ascender Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(29)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(29)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Isuzu Ascender Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Isuzu AscenderL6-4.2LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Isuzu AscenderV8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Isuzu AscenderL6-4.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Isuzu AscenderV8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Isuzu AscenderV8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2004 Isuzu AscenderV8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Isuzu AscenderL6-4.2LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2006 Isuzu AscenderL6-4.2LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Isuzu Ascender Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(29)

Rating Summary
28
1
0
0
0
28
1
0
0
0

Martin

29 years of experience
166 reviews
Martin
29 years of experience
Isuzu Ascender L6-4.2L - Car is shaking or vibrating - Hendersonville, Tennessee
Very nice and knowledgeable. Quickly diagnosed my vehicles problem(s)

Joseph

33 years of experience
540 reviews
Joseph
33 years of experience
Isuzu Ascender L6-4.2L - Variable Valve Timing (VVT) Solenoid - Plano, Texas
Great service and price!

Nathan

17 years of experience
279 reviews
Nathan
17 years of experience
Isuzu Ascender V8-5.3L - Car is not starting - Austin, Texas
Nathan was excellent at responding, very clear on quoting, and was kind when I about had a panic attack over how much my repair would cost. No fault of his whatsoever, I was off on my own hopeful budget...LOL! I have already submitted a request for the repair and look forward to the visit.

Ruben

10 years of experience
63 reviews
Ruben
10 years of experience
Isuzu Ascender L6-4.2L - Oil Change - Columbia, South Carolina
I highly recommend Ruben. He is very knowledgeable with cars. He has a great personality. I would love to continue to work with him. He did an awesome job.

Excellent Rating

(29)

Rating Summary
28
1
0
0
0
28
1
0
0
0
Number of Isuzu Ascender services completed
319+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Which Tires Are the Best for Highway Driving?
Highway Highway driving can mean different things to different people. Road surfaces are as vastly different depending on which part of the country you are in, as are the weather conditions. Some major factors to consider for highway driving are:...
How to Prevent Motor Oil Sludge
Regular oil changing in your car helps prevent sludge. Motor oil sludge can cause worse gas mileage, low oil pressure, and damage to engine parts.
P0529 OBD-II Trouble Code: Fan Speed Sensor Circuit Intermittent
P0529 means the cooling fan sent an incorrect voltage signal, caused by open/shorted/corroded wiring, or a damaged fan motor/relay/speed sensor.

My compressor went out. Will that cause my engine to not operate?

Hello. If you have an engine that is cranking but not starting, then you need to look on dashboard to see if the theft light is flashing first. If it is, then try a different key to see if that...

Sporadic chirp--dont think it's the belt

The chirping you are hearing may not be belt related. Your suspension can also make noises like this. If you hear the noises going over bumps that is a huge sign. The fact you have narrowed it down to one...

P1035 trouble code

Hi There, I would suggest looking to other possibilities that may contribute to the O2 sensor producing a bad reading such as a failing mass air flow sensor (causing too much fuel to be introduced to the motor), bad fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com