Infiniti Q60 Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Infiniti Q60 Fuel Pump Replacement is $417 with $277 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Infiniti Q60V6-3.7LService typeFuel Pump ReplacementEstimate$708.20Shop/Dealer Price$852.80 - $1272.43
2014 Infiniti Q60V6-3.7LService typeFuel Pump ReplacementEstimate$789.45Shop/Dealer Price$953.52 - $1438.53
Show example Infiniti Q60 Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0

Jason

16 years of experience
344 reviews
Jason
16 years of experience
Infiniti Q60 V6-3.7L - Oil Change - Bronx, New York
Looked over the car as if it were his own. Gave me recommendations on my car that we’re helpful, I’ll definitely request him again.

Kevin

6 years of experience
8 reviews
Kevin
6 years of experience
Infiniti Q60 V6-3.0L Turbo - Oil Change - Irvine, California
Excellent-right on time, vey efficient service. Ron G

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Infiniti Q60 V6-3.7L - Oil Change - Smyrna, Georgia
Great job, lots of useful advice

Ryan

11 years of experience
2 reviews
Ryan
11 years of experience
Infiniti Q60 V6-3.0L Turbo - Oil Change - Glen Burnie, Maryland
Good service

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0
Number of Infiniti Q60 services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Oregon
Automotive technician jobs can include mobile vehicle inspector. Apply to become an employee of the DEQ in order to perform emissions tests.
How to Remove, Install, and Adjust Ignition Timing
Ignition distributors help spark the gas and air in the engine. Worn distributors need to be removed to be cleaned to maintain proper ignition timing.
How to Detail a Car
Cleaning Cleaning your car is more than just about pride in your vehicle’s appearance. It can prevent or even correct damage that has taken place, extending the life of your car’s body. Proper car detailing can be expensive to do...

How to safely lift my vehicle

Hello. The jacking points on your vehicle should be marked by a triangle on the side of the pinch weld pointing down. You place the jack right underneath the pinch weld to lift up the vehicle. The lifting points should...

Our 2000 dodge durango tries to turn over, but won't start. We already replaced coils and spark plugs

The blinker malfunction is probably a coincidence. High fuel consumption could be related to the no start issue, particularly if faulty engine management controls, or sensors, are at issue. Basically, inasmuch as the car will just flat out not start...

Where is crankshaft position sensor located on 2010 Vw Tiguan 2.0T

The crankshaft position sensor should be located right next to the crankshaft pulley and harmonic balancer. A crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is an electronic device used to monitor the position or rotational speed of the crankshaft. This information is used...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com