Infiniti Q45 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(55)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(55)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Infiniti Q45 Power Steering Pump Replacement is $417 with $249 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Infiniti Q45V8-4.5LService typePower Steering Pump ReplacementEstimate$1036.38Shop/Dealer Price$1201.37 - $1655.23
2006 Infiniti Q45V8-4.5LService typePower Steering Pump ReplacementEstimate$966.26Shop/Dealer Price$1144.58 - $1665.81
1998 Infiniti Q45V8-4.1LService typePower Steering Pump ReplacementEstimate$673.17Shop/Dealer Price$801.57 - $1177.98
2000 Infiniti Q45V8-4.1LService typePower Steering Pump ReplacementEstimate$926.86Shop/Dealer Price$1092.08 - $1573.12
1992 Infiniti Q45V8-4.5LService typePower Steering Pump ReplacementEstimate$1258.43Shop/Dealer Price$1431.97 - $1892.24
2005 Infiniti Q45V8-4.5LService typePower Steering Pump ReplacementEstimate$966.26Shop/Dealer Price$1145.13 - $1666.77
2004 Infiniti Q45V8-4.5LService typePower Steering Pump ReplacementEstimate$966.26Shop/Dealer Price$1144.71 - $1666.04
1999 Infiniti Q45V8-4.1LService typePower Steering Pump ReplacementEstimate$810.07Shop/Dealer Price$972.69 - $1451.77
Show example Infiniti Q45 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(55)

Rating Summary
53
2
0
0
0
53
2
0
0
0

Pardeep

16 years of experience
1060 reviews
Pardeep
16 years of experience
Q45 1994 - When I slow down and stop the car, engine shuts off - San Jose, CA
Pradeep came on time and diagnosed the problem with my car. He was polite and respectfully wore a mask.

Gregory

208 years of experience
385 reviews
Gregory
208 years of experience
Q45 2002 - Camshaft Position Sensor - Littleton, CO
Greg, your man! Very convenient and worth every penny! No offense, let's hope I don't need to call you again, but if I have any future issues, you're the mechanic I am calling on! Thanks for your hospitality!

Nazareth

24 years of experience
219 reviews
Nazareth
24 years of experience
Q45 1996 - Starter - Altadena, CA
Nazareth arrived on time and did the

Tabitha

14 years of experience
318 reviews
Tabitha
14 years of experience
Q45 2003 - Camshaft Position Sensor - San Diego, CA
Very timely, professional and competent. Highly recommend.

Excellent Rating

(55)

Rating Summary
53
2
0
0
0
53
2
0
0
0
Number of Infiniti Q45 services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Shift Interlock Solenoid
The shift interlock solenoid needs to be replaced if the vehicle cannot shift out of park and the battery is not dead.
The Guide to Legal Car Modifications in Minnesota
ARENA Creative / Shutterstock.com Whether currently living in the state or planning to move to Minnesota in the near future, you need to make sure that you understand the restrictions on vehicle modifications. The following will help...
Cell Phones and Texting: Distracted Driving Laws in Kansas
Distracted Distracted driving in Kansas is defined as talking on the phone or texting while driving. In addition, anything else that causes the driver’s attention to be diverted from the road is considered a distraction. If you cause an accident...

What should I know about using snow cables?

While your SUV is equipped with tires capable of handling both mud and snow, if you live in an area where significant wintertime snow accumulates, you’ll probably want to invest in a set of snow cables (not chains – it’s...

not central locking. why?

Hello and thank you for contacting YourMechanic. You can determine which doors are unlocked through the central locking system in the MMI. When operating the MMI, select the 'Car' function button then select 'Systems' the select 'Central Locking'. You can...

Hello my Mazda 5 2010 has been baby making a grinding sound when I turn on ac and the loudness of it has gotten increasingly worse

Hi there. Typically when you hear a loud noise like you've described when you turn on the AC system, it's caused by damage to the AC compressor. It could be due to the internal bearings wearing out, which would explain...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com